Beatle juice

I talked to redline they can take it in but only want to deal with just a engine. I looking for a shop who can take the whole bike. So when I pick it up it's ready to go. Thank you for the reply do you know any other shops?

thank you

Looking for reputable engine builder. I'm in jefferson city mo. Farm and Sand Toys is booked for a year. Do you know the next closest builder?

looking for a performance 2 stroke shop near st.louis precision powersports is gone any suggestions

Decked headvf4sdune ported stock cylindersstock crank+4 timing platebolt on aluminum crossover intakekeihin pj 34mm carbspod filtersshearer pipes12 tooth front sprocket stock rear22in 4 snow tires used on sandim 225pdselevation 1000feetIm getting a nice caramel color on the spark plugs so the jetting is closeWhat is happening is ill be on 25% of the throttle and shoot it to 75% and it will pull the front wheels 1st threw 3rd gearbut if i go 25% to 100% it pulls but no where near as hard.when im running all out the bike runs good 1 to 5 but 6th it just holds it there and no more acceleration like it used to have.I was having a fuel delivery issue but that is now fixed with a pingel petcock.

how big can you go on a stock case and stock crank? Im wondering how big of jugs you can fit on a stock crank case

You can be lean on the low end and rich on the top end I'd take the advise richer won't hurt leaner can/will

i looked but i still need some direction please

Stock milled head Dune port Vf4 Stock bore in frame shearer drag pipes +4 timing Pod air filters elevation 900feet

hello im trying to jet for a pair of 34 mm keihin pj carbs on my banshee i originally had stock carbs running a 300 main and 35 pilot is it possible to get the jetting close from this information?