Doom400

Hello was recently driving the banshee really fast full throttle. And I completely lost lights and power. I waited about five minutes and tryed to start again and my kickstart seized. The last time I did a top end was 2014 and don’t really feel like messing with it again. is there any local shop that you guys trust with your banshees and that will not charge an arm and a leg. I’m willing to travel pretty much anywhere in California thank you

Was really hot 100 degrees …was racing a bunch of buddies on bikes …1 hour long rush …lost my rear brakes down the hill total loss ….fluid boiled over …after bike cooled brakes work great ….is this normal in extreme conditions :::wife usually rides this banshee…doesn’t push it like me …but don’t won’t her to loss brakes…there still a few more rides on the pads but low

Thanks again for the responses guys. I am going to dive in this weekend. The bars are straight when the bike is sitting. I undid and checked for tightness and straightness. But soon as you start driving the handlebars are misaligned. And there’s a little play in the stem 2 where there wasn’t a couple weeks ago before my jump-athon. I’ll keep you guys posted now I know where to look thanks again

Hello. haven’t been in any recent crashes. But I’ve had plenty of close calls ....and a few nose dives way to hard .....lately ......(this atv was hit hard by you Utv a year ago ). The handlebars are aligned and correct when stopped ... but when there driving they are too the right. The stem seems a little loose and the front end seems like it’s getting sloppy. ..... I just checked the bars are straight and tight when stopped .... what could be the problem ? I have no clue where to start .... maybe bent the steering stem? From a Utv crash and I’m just noticing now? Because my buddy pointed it out ......but I have noticed stem was lose before hand ....thanks

Figured it out. Shout out to kawa110 ... this guy is awesome. Really helped me get my banshee running after a bad Utv crash....😀🤪🤪🤨😜

Hello I recently got my banshee running after a crash with a Utv (Utv won ) it’s awesome I love it. And it seems like everything is running great.engine and structural. A member here sold me a frame that I had to take pieces off to weld and fix..thanks 1)I I’m trying to raise the rear brake foot pedal .... you really have to press down to get the rear brakes to engage. Worries me because my wife drives the banshee a lot 2)brakes have a new pads and have been serviced and stopp great.(you just really have to press down to get them to engage) I asked the shop six months back if there is any way to raise it. And they said that’s just how it is. Geometry of bike. 3)also if anyone comes of cross any uncut OEM blue front fenders I would like to buy thanks

I’ll pm you now

Accidentally posted twice cannot delete sorry

La area

https://thumpertalk.com/forums/topic/1347738-utv-head-on-collision-with-my-banshee-welding-suggestions-help-with-picks/

https://thumpertalk.com/forums/topic/1347738-utv-head-on-collision-with-my-banshee-welding-suggestions-help-with-picks/. Link with pics Any help. I’m wondering if I could buy a cheap frame ... There was someone from this website that had one for sale ....for 250

Worst Crash I’ve been in. I’m thankful I’m OK I have a sprained wrist and my knee hurts. I was riding today with my brother-in-law. And I was going up a fire Road about 20 mph ...When I reached close to the top a four seater Utv... Flew over the other side at excessive speeds. catching air ...He landed and we both hit the brakes at the same time it was too late head on collision. I flew about 6 feet in the air Straight up landed on my knees and got right up. He came out he was a 16-year-old kid barely getting his mustache hair(I didn’t no who to blame ) ...The banshee started and I rode it back to camp. I didn’t know whose fault it was and I’ve never been in that situation before.My front bumper is completely crushed and so are the front mounting bolts(a striped number screw). What do you guys recommend ...find a welder. I’m willing to pay a good amount to ...Or do I look for a frame and take the pieces I need off that are bent or try to replace that front assembly. I’m having a hard time uploading pictures can someone give me some advice I’ve tried downsizing can I text them to someone

Worst Crash I’ve been in. I’m thankful I’m OK I have a sprained wrist and my knee hurts. I was riding today with my brother-in-law. And I was going up a fire Road about 20 mph ...When I reached close to the top a four seater Utv... Flew over the other side at excessive speeds. catching air ...He landed and we both hit the brakes at the same time it was too late head on collision. I flew about 6 feet in the air Straight up landed on my knees and got right up. He came out he was a 16-year-old kid barely getting his mustache hair(I didn’t no who to blame ) ...The banshee started and I rode it back to camp. I didn’t know whose fault it was and I’ve never been in that situation before.My front bumper is completely crushed and so are the front mounting bolts(a striped number screw). What do you guys recommend ...find a welder. I’m willing to pay a good amount to have this fixed ...Any questions I will answer still resting from the crash. No More riding on roads Frequently travel to by Utv s ... If anyone knows any welders in our area that would be cool too. The front light is also bent

Hello what kind of brake pads are you guys running I’m looking to get a set front and back don’t mind on spending extra dough for a good break pads thank you

And as far as finding a banshee just use the Facebook app la area there’s a ton of clean ones ...but you will regret a red sticker