Dweave17

Correction to carb size. It measures 35mm

Not trying to beat a dead horse here but I need some direction. Purchased an 87 banshee. 34mm pj. Trinity II cylinders. Pod filter. Turbo cut domes from trinity. 148 pounds of compression on both cylinders. Has 170 main, cej needle, and 45 pilot. Wont get out of its own way. I do not have the funds right now to go back to twins and I know someone will suggest it.would rather just get the jetting good on this one. 850 elevation. 70 to 80 degree average ride temps and 65-80 percent humidity.... Thanks in advance for any and all info.

Not to bring a dead thread back to life. But I have recently purchased a banshee with a 2 into one setup. 148 pounds compression both cylinders. Trinity II cylinders, air pod. 34mm keihin pj. 170 main 45 pilot and cej needle. NONE OF IT carb wise can be right. Can get it to idle good but very boggy on bottom and never gets up on the pipe even held at WOT. 850 feet elevation 70-85 degree riding weather with 65 to 85% humidity. Where do I start with jetting!?