andrew.s

Actually I haven't but I went to sandlake a couple weeks ago and got it up to 67mph so still not as good as before but it seems to be fine Sent from my SM-G965U using Tapatalk

I'm using a GPS speedometer and my friend and mine both say the same mph so it shouldn't be the speedo either Sent from my SM-G965U using Tapatalk

I don't think so. I'll check my Reed valve bolts but my carb clamp is as tight as it will go Sent from my SM-G965U using Tapatalk

It started doing this before I got a new filter so I originally thought it wasn't getting enough air so I got a new filter and nothing else has changed Sent from my SM-G965U using Tapatalk

Okay so my stockish banshee used to do 70mph on the dunes fastest was 71.2mph downhill and now it won't go past 60mph. It feels like it has good power still and I checked compression and it's at 120 cold and 115 hot and a brand new Toomey filter so I don't understand what could be the problem. Sent from my SM-G965U using Tapatalk

I cleaned the carbs today there was literally sand inside the jets so that isn't good.. I'm gonna use air filter oil next time and the jets are 290s idk if I just fixed my problem I won't know till I go riding next but my left carb pours gas out of the over flow when I turn the gas on and I have to turn the gas off then back on again and it's fine not sure what this means

Has brand new plugs, no idea what jets it has, bike didn't do this about 2 rides ago so probably 5 hours of engine time ago and no elevation change sea level everytime.

From my knowledge all that was done to it was toomey t5 pipes and a Toomey air filter and porting done by Oregon Motorsports I believe

So I went riding this weekend at sandlake in Oregon and when I'm pinning it for more then like 15 seconds the bike just looses all power like I turned the bike off and I have to pull the clutch in rev it a bit then it's fine again. Any reason this could be happening?