LukeSandiefer
-
Posts
124 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by LukeSandiefer
-
-
Timing curves. At the very least you can use this instead of a timing plate
Sent from my STV100-1 using Tapatalk
Interesting
-
So they are actually really close to 3/32" off on every stud. How did you come up with the 1/2" - 3/4" earlier?
Cause i'm a dumbass
-
He has no jets in there? Not even the needle? Iv'e heard great about the JJH needles in the middle position, start off with a 150 main and jet down from there. 150 should be a safe size to plug chop in, should be rich.
-
What is programmable about these?
-
Any pictures?
-
I just bought a set of 10 paddle haulers for a good price, and didn't even think about too much grip. I have a stock stroke, stock bore motor with an MX port, pipes, and other bolt ons. They are 20" tires by the way.
-
1
-
-
I'm interested. 2002 plastics.
-
1
-
-
Maxima Castory 927 is impossible to find in South East MI.
-
I was thinking on buying a mister electrical stator, cdi, flywheel and coil off ebay for a bike I'm selling but I want to know if anybody has tried this brand and if it was any good?
Stay far away from all that bs. OEM is the only way to go when it comes to all those parts you just listed.
-
Flexx bars are nice if you will be riding in hard, bumpy areas. If you're in wide open dunes and fields they are a waste of $300+. Just my opinion. Reduces arm pump and pretty sure it eliminates the chances of your bars bending.
-
Okay, so, I measured the wheels and my hubs on the rear are 4x115. These wheels I got are 110-111 mm's across. That is Honda bolt pattern, I think were good here. We'll see for sure when they come in. Thanks Zilla
-
It is bigger than the wheels holes. The pattern is pretty tight.
-
That's what it sounds like. The 89-90 year the bolt pattern was the same as the front. All fronts, all years was 4/156. See if your front rims fit the back hub.
Sent from my iPhone using Tapatalk
Cool, will do
-
If the studs are 1/2-3/4" from lining up, there is no way you have 400ex pattern (4/110) on the wheels with banshee (4/115) hub. This would be the bolts are only 2.5mm off from lining up. 2.5mm is less than 1/8" off. To be 3/4" off (19mm) you could have 4/115 on wheels with 4/156 on hubs. This would be 20.5mm from each bolt lining up with the hole.
Okay, so I will measure when I get home and get back to you. So you're saying that I might have the older style big hubs?
-
I think it was 89-90 that had the big hub. I am not 100% but I am pretty sure it wasn't the first years. I had one, talk about a bitch to find rims for it.
Mines a 2002, we'll see what these 400ex hubs do.
-
And yours studs are bigger?
Banshee is 4/115 and 4/156(big hub rear)
Blaster is 4/100
400ex is 4/110.
If all your studs are off by 1/2, you might have the big rear hub.
Big rear hub? I didn't know there was anything else than just the regular rear one. And no, the studs are the right size for the holes.
-
The 400ex throttle works great. Easy installation too.
-
is the pattern close?
Bout a half inch-3/4 of an inch off on every stud.
-
I'm still wondering why the guy that sold these to me said they fit on his stock banshee. Can't stand people. Of course i'm dumb enough to not realize that the pattern is way small.
-
If I come from NJ to ride there for the weekend, is there anything special I need to do? Just get a permit and ride? Have T5's on the banshee, do I need spark arresters for the mufflers?
Yes you need spark arresters, and I thnink you need an out of state sticker, and a park sticker or something. Go on Michigan's DNR website.
-
You could also drill between the Honda pattern for a yammy pattern. I have a couple of sets of tires that have both patterns.
Sent from my iPhone using Tapatalk
Thanks, was thinking about this
-
You pretty much answered your own question
I was wondering about the length of the 400ex hub, not the spline pattern. I know that the banshee hub is shorter in overall length than the 400ex's, so if I put the 400ex hub on I wonder if I'll be able to even thread on the castle nut. Sorry, should have been more specific.
-
I bought these paddles for my Banshee, got them for a great deal but the guy lied and said they were Yamaha bolt pattern. They appear to be Honda, because they are a smaller pattern. Would I be able to put 400ex hubs on and throw those paddles on? I know Banshee hubs fit on a 400ex axle for sure, iv'e done that.
-
I'm in Monroe, the most boring city in Michigan.
Full set banshee plastic for sale
in For Sale - Parts & Accessories
Posted
Phone number?