03banshee88
-
Posts
26 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by 03banshee88
-
-
Do you still have any banshee parts
-
Text me at 4438752683
-
Decent condition pipes. 175$ buyer pay half shipping
-
Can you send pics of case with crank to 4438752683
-
I have some fmf powercore 2's for 200 shipped
-
What would you be looking to trade for ?
-
Also Athena 392 big bore kit right cylinder is bad though
Sent from my iPhone using Tapatalk
-
Fmf powercore 2 pipes - 300
Trinity 2-1 carb setup - 150
Pro design uni air filter setup- 80 only been on for one ride
Some other stock parts once I start tearing it down as well. 4438752683
Sent from my iPhone using Tapatalk
-
Only thing I did notice but don't know if that's what going to do that is one of the o rings that goes in under the fiber was broken but the little piece that was broken still went in under the fiber
Sent from my iPhone using Tapatalk
-
Yup
Sent from my iPhone using Tapatalk
-
The clutch lever feels good also I can't figure it out
Sent from my iPhone using Tapatalk
-
Yes I had the arrow lined up to the arrow. I also put one of the thrust washers in the one between outer and inner basket because it did not have one when I bought the 4 wheeler so it was making a knocking noise that's why all this happened but what makes it weird is because the clutch worked before I tore it apart and added the other thrust washer and lock washer that was torn up
Sent from my iPhone using Tapatalk
-
Yes
Sent from my iPhone using Tapatalk
-
The lock washer for the clutch basket. And yes I did.
Sent from my iPhone using Tapatalk
-
Do you have any suggestions I could take a look at
Sent from my iPhone using Tapatalk
-
I did the spacing with the steel plates going around I adjusted the clutch with the arrows on the case. I don't know what else I could have done
Sent from my iPhone using Tapatalk
-
I had the arrow on the pressure plate lined up with arrow on inner hub
Sent from my iPhone using Tapatalk
-
What do you mean as far as moving the pressure plate one bolt hole over
Sent from my iPhone using Tapatalk
-
So the clutch did work but I had to replace a washer on the basket so took the clutch out. Just put everything back and it's doing this in every gear is the clutch shot
Sent from my iPhone using Tapatalk
-
What's your paypal I would like to order one?
Sent from my iPhone using Tapatalk
-
So it has a 170 main jet and a 55 pilot jet and it seems to have stock reeds still in it as well. Doesn't that jetting seem kind of low for it being a big bore with all the other add ons
Sent from my iPhone using Tapatalk
-
No I haven't taken off the the pressure plate yet ran out of time going to do that tonight. From what I've been reading it's either the basket bushing is shot, or the nut has come loose. From what I read and can see.
Sent from my iPhone using Tapatalk
-
Clutch side of the motor was making a noise only when I let the clutch out. So I pulled cover and this is what I got. Is this play normal in the baskethttps://vimeo.com/134902241
Sent from my iPhone using Tapatalk
-
It's a keihin pwk how can you determine what size though I haven't found any markings on it
Sent from my iPhone using Tapatalk
Fmf fattys gold series pipes
in For Sale - Parts & Accessories
Posted
Still available
Sent from my iPhone using Tapatalk