Jump to content

Lilcez

Members
  • Posts

    5
  • Joined

  • Last visited

Everything posted by Lilcez

  1. Ok so I did compression and i got 125 per cylinder. Also did the +4 timing. Now that I'm riding the bike in high gears when I punch the gas it squirts gas out of the overflows. When I rev it at idle it doesn't do this nor does it spill gas when it idles I recently cleaned the carbs and replaced both plungers the old plungers weren't seating right and did cause overflow leak
  2. Yea I haven't had a chance to do a compression test. I've been running premium gas on it though, I've heard people run 93 premium although here I only get 91? Bike starts in one kick every time and what can happen if I don't change the timing?
  3. Just ordered some 300s. I got the 30s somewhere going to put these on before continuing with the engine break in. Thanks for the info
  4. Just rebuilt the motor banshee has 080 over bore Cool head 21cc domes Fmf gold series Stock carbs (260 mains 27.5 pilots from stock setup) Boggs off of idle, still currently breaking in the engine so haven't gotten it high in gears or wot K n filter no air box 52 feet above sea... What would be recommended for this set up?
  5. Breaking in my shee from a fresh rebuild!

×
×
  • Create New...