-
Posts
14 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by 323Racing
-
-
Hi I'm trying to install my new swing arm and the upper linkage bolt is too long.
Is this normal? Should I just use washers? Thanks
-
Hi I am trying to figure out how to put back my steering stem. When I removed it, a collar fell out and there is also another one in the frame with the bearing.
I have 2 collar spacers
one washer
one nut and
one cotter pin
So what I'm asking is how and what order do these parts get assembled?
Please help! Thanks
-
What type of power is the bike making? If it's pretty well built you may need some trans work done to promote better shifting. At a minimum there are some simple bolt on items that can help.
Otherwise, check ALL components for wear and properly adjust the eccentric/shift shaft.
Should be making some power.
Pro Design 22cc chambers
.50 over vitos superstock pistons
VForce 4 reeds
Jetted carb
FMF Fattys with FMF power core 2 silencers
K&N air filter kit with airbox and lid
At sea level
93 Octane
32:1
Maxima Castor 927
Maxima MTL 75w
-
Ok so after driving my banshee for the first time I love it! BUT I have a few problems I want to fix before I paint my frame.
It is pretty much impossible to get it into neutral while its running
Shifting gears is hard, you really have to force it into gear
and I have a slight bog right off idle, other than that it runs amazing
I heard about the pancake bearing, is this worth it? Probably going to get a new impeller and oversized radiator. Mods are .50 over vitos pistons, 22cc pro design cool head, vforce4 reeds, k&n filter kit with airbox and cover, and jetted carb.
Thank!
-
Thanks what about the idle/air screw? Start with 2 turns out?
-
YFZ350SPV Means what?
YFZ350SEV Special edition?
-
Deadbeat I thought it was 14.1hp.......Also does the nose of all OEM banshee plastics have the yamaha badge on it?
-
Is it black with purple flames?
Nope
-
The numbers match the frame. The rad cover has the carbon fiber look and 50th badge. I'm so confused
-
Hi I need to jet my carbs but I wanted a good place to start.
.50 over pistons
Pro Design Cool Head 22cc domes
FMF Fattys Powercore 2
Sea Level
Stock airbox with lid and filter
Vforce 4 reeds
What jets will get me close to where it needs to be? Thanks
-
Just took the head off it has 22cc domes and .50 over pistons
-
I just bought a 2006 banshee 50th anniversary edition. On the title it says YFZ350SPV. The banshee is black with gray frame and this is how it came brand new off the showroom he showed me pics. Is this right? Isn't it the yellow one? Please help Thanks.
-
Hi I'm new here and just bought my first banshee. Its in rough shape but has a brand new top end. The top end was never started. I did a compression test with the carbs, reeds and exhaust off (no? I had it apart already).
The left side was 135psi and right was 127psi. It has a pro design cool head but I don't know what cc the domes are and .30 over pistons. Does this sound ok? Thanks!
Steering stem assembly?
in General Banshee Discussion
Posted
Already did, only see one collar. Thats why I'm so confused as to where this other collar goes.