Jump to content

Tspiva

Members
  • Posts

    27
  • Joined

  • Last visited

Posts posted by Tspiva

  1. I've talked to a few different builders and I am getting some mixed messages as to the necessity of alockout cover and lockup. Just trying to build an all around dune bike. Planning on going with a pro mod transmission and it is either going to be a 4mm cub or serval.. Trying to get the bottom end done first. Thanks for your time in advance.

    • Like 1
  2. First of all thanks for your time. This will be my second bike.

     

    97banshee

     

    Works shocks

    Chrome everything(handle bars, kick starter, throttle, a arms,and pretty much everything else)

    +6 chrome swing arm

    Durablue axle

    38 mm lectrons with k&ns

    Trinity stage iv pipes

    Cpi drag pipes

    Dirt wheels and tires

    Brand new Mohawks and 10 paddle extremes on Douglas rims

     

    V force 2reeds

     

    Also he has every stock part that came off the bike

     

    4mm hot rods crank

    Hinson clutch basket

    Straight cut gears

    Drag ported

    Cool head

    Race fuel

    Compression is180 psi

     

    Seems like a good deal the bike is very very clean, my main question is horsepower, he said it dynoed at 97 horsepower, from my reading on this forum that sounds a bit overboard. The bike was built by prescision in Stockton ca, I can not find any info on them.

     

    Any advice on things to checkout would be greatly appreciated, I plan on taking it for a ride and checking compression and fluids.

     

    Thanks for the help!

  3. My gearing is 13 42. Just got back from the dyno right at 60 horsepower, I have a plus 6 swing arm. My weight is 160. I know this question gets asked a lot, I have read just about every article. Looking for a good all around tire, got mixed messages from a few local shops. Leaning towards 21x12x8 8 paddle extremes. Thanks for your time.

×
×
  • Create New...