DragBikeParting

Cheaper ladder bar +8 arm SOLD

SOLD: Both JJ&A axles Checker seat Rear Brake set up Both rear marvins Aluminum Tank Chain, 15/41 sprockets, clutch cable Ill keep updating

http://www.ebay.com/itm/301187242747?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

SENT

Parting out these 3 Drag Bikes. Trust us not what we want to do but our kid is heavy into motocross and doing well. Time to not be selfish. Starting left to right: (Left) Primer Red one is a 10Mil Cheetah cub 465cc on Alky: Dyno'd 114 HP Want to try and sell motor as a complete first asking: $5000obo Billet 10mil crank Nate McCoy Drag ported Cheetah cub, Wosner pistons, Noss Machine cool head with custom domes Vforce 2 Reeds OEM stator Clean bored stock cases White Knuckle Billet manifold 1st down 2-5 Dunable override: Shearer BB OOF Left side pipes: $550 Packard Lectron Alky carbs 40's : $750 Pods: $45 Dyna Ignition: $275 Aluminum Gas tank 1.5gal: $ 150 +10chrome ladder bar swingarm: $350 JJ&A Drag Axle: $400 10in extended front stock and lightened frame, Stellar Chromoly J-Arms, and Custom Steering Stem, and radiator, aprox 60% chromoly,Powder Coat Black no title: $800 Sling Shot clutch: $275 Front Marvins 14.5": $250 Rear Marvins 14.5": $130 Front Smoothies JJ&A 18'swith lightened rims 10x4 drag cut: $ 275 Rear Paddles 22x11x8 10paddles triple buff: $450 Cut Down Black vinyl seat: $100 Misc internals and externals (chain guides,plastic, tensioners..etc): PM (Center) Blue one is a 4mil Cheetah cub 421cc on gas: Dyno'd 105HP Parting this motor: 4mil Hot Rod Crank: $250 Nate McCoy Drag Ported Cheetah Cub *polished*: (pistons and domes) $1400 SOLD Pro Design Cool Head: $75 SOLD OEM Stator with timing plates: $150 Vforce 2 reeds: $150 Clean stock Cases: $200 1st down 2-5 Dunable override:$250 In Frame BB Shearer Pipes Chrome: $500 +8 Oval housing Top Dog chrome swing arm with flame design:$400 Torch works aluminum radiator, slight bend from crash but works fine and is nice: $150 Roll Design Steering Stem with LSR bar clamp: $ 300 Chrome Clutch case: $100 Hinson full basket 7 disc clutch straight cut gear and flat bearing: $600 MOD QUAD Flame design Chrome stator cover: $ 150 Chrome J-arms made by custom creations: $275 Billet Manifold for 35's: $75 Aluminum tie rods: $25 Lightened Stock Frame, Black no title: $400 22x11x8 Extreme buff's with 8 paddles: $450 Trimmed Blue plastics:$150 Custom covered seat with iron cross: $100 Billet Front hubs LSR no front brakes: $150 40mm axle carrier: $70 Revalved Rear OEM shock done by TCS Hillshooter shock: $300 Misc internals and externals (chain guides, tensioners..etc): PM (Right) Green One is a 4mil Supercub 485cc on Alky: Dyno'd 114HP Want to try and sell motor as a complete first: $5000obo Noss Machine Super Cub Cool Head with custom to the cylinder domes Nate McCoy Drag ported Cylinder *polished* 73 bore instead of 72 Neutral Down dunable 1-5 override Lock up clutch OEM stator Clean Cases match ported bored for Super Cub cylinder 39 PWK Alky Carbs, need new power jets, I can buy some and put them in whatever works: $450 Pods:$45 BB OOF Left side CPI's: $500 +8 ladder bar chromoly swing arm a little ruff: $200 Custom Creations drag chrome A-arms: $ 450 Aluminum tie rods: $25 JJ&A Drag Axle: $ 450 SOLD Aluminum Radiator: $ 125 Chrome Stock Steering Stem: $100 Front Marvin Shaws 14": $250 Rear Marvin Shaw 13": $130 22x11x8 10 paddle Extreme Haulers Triple Buffs: $450 Front Smoothies JJ&A 18'swith lightened rims 10x4 drag cut: $ 275 Mod Quad Polished Stator cover: $150 Polished Clutch Cover White knuckle: $150 Super cut down vinyl/fabric black checkerboard seat: $100 Lightened Stock frame metallic purple has title: $500 Misc internals and externals (chain guides, tensioners..etc):PM NOTHING INCLUDES SHIPPING. PM me your number and what you want a picture of or just PM for questions. Some of it may not be taken apart yet but we are working on it right now.

we will be back in time!

Have a set of virgins 64 bore. Let me know if your interested.

Yes replicable and stock length.

Parting out these 3 Drag Bikes. Trust us not what we want to do but our kid is heavy into motocross and doing well. Time to not be selfish. Starting left to right: (Left) Primer Red one is a 10Mil Cheetah cub 465cc on Alky: Dyno'd 114 HP Want to try and sell motor as a complete first asking: $5000obo Billet 10mil crank Nate McCoy Drag ported Cheetah cub, Wosner pistons, Noss Machine cool head with custom domes Vforce 2 Reeds OEM stator Clean bored stock cases White Knuckle Billet manifold 1st down 2-5 Dunable override: Shearer BB OOF Left side pipes: $550 Packard Lectron Alky carbs 40's : $750 Pods: $45 Dyna Ignition: $275 Aluminum Gas tank 1.5gal: $ 150 +10chrome ladder bar swingarm: $350 JJ&A Drag Axle: $400 10in extended front stock and lightened frame, Stellar Chromoly J-Arms, and Custom Steering Stem, and radiator, aprox 60% chromoly,Powder Coat Black no title: $800 Sling Shot clutch: $275 Front Marvins 14.5": $250 Rear Marvins 14.5": $130 Front Smoothies JJ&A 18'swith lightened rims 10x4 drag cut: $ 275 Rear Paddles 22x11x8 10paddles triple buff: $450 Cut Down Black vinyl seat: $100 Misc internals and externals (chain guides,plastic, tensioners..etc): PM (Center) Blue one is a 4mil Cheetah cub 421cc on gas: Dyno'd 105HP Parting this motor: 4mil Hot Rod Crank: $250 Nate McCoy Drag Ported Cheetah Cub *polished*: (pistons and domes) $1400 Pro Design Cool Head: $75 OEM Stator with timing plates: $150 Vforce 2 reeds: $150 Clean stock Cases: $200 1st down 2-5 Dunable override:$250 In Frame BB Shearer Pipes Chrome: $500 +8 Oval housing Top Dog chrome swing arm with flame design:$400 Torch works aluminum radiator, slight bend from crash but works fine and is nice: $150 Roll Design Steering Stem with LSR bar clamp: $ 300 Chrome Clutch case: $100 Hinson full basket 7 disc clutch straight cut gear and flat bearing: $600 MOD QUAD Flame design Chrome stator cover: $ 150 Chrome J-arms made by custom creations: $275 Billet Manifold for 35's: $75 Aluminum tie rods: $25 Lightened Stock Frame, Black no title: $400 22x11x8 Extreme buff's with 8 paddles: $450 Trimmed Blue plastics:$150 Custom covered seat with iron cross: $100 Billet Front hubs LSR no front brakes: $150 40mm axle carrier: $70 Revalved Rear OEM shock done by TCS Hillshooter shock: $300 Misc internals and externals (chain guides, tensioners..etc): PM (Right) Green One is a 4mil Supercub 485cc on Alky: Dyno'd 114HP Want to try and sell motor as a complete first: $5000obo Noss Machine Super Cub Cool Head with custom to the cylinder domes Nate McCoy Drag ported Cylinder *polished* 73 bore instead of 72 Neutral Down dunable 1-5 override Lock up clutch OEM stator Clean Cases match ported bored for Super Cub cylinder 39 PWK Alky Carbs, need new power jets, I can buy some and put them in whatever works: $450 Pods:$45 BB OOF Left side CPI's: $500 +8 ladder bar chromoly swing arm a little ruff: $200 Custom Creations drag chrome A-arms: $ 450 Aluminum tie rods: $25 White Knuckle Drag Axle: $ 450 Aluminum Radiator: $ 125 Chrome Stock Steering Stem: $100 Front Marvin Shaws 14": $250 Rear Marvin Shaw 13": $130 22x11x8 10 paddle Extreme Haulers Triple Buffs: $450 Front Smoothies JJ&A 18'swith lightened rims 10x4 drag cut: $ 275 Mod Quad Polished Stator cover: $150 Polished Clutch Cover White knuckle: $150 Super cut down vinyl/fabric black checkerboard seat: $100 Lightened Stock frame metallic purple has title: $500 Misc internals and externals (chain guides, tensioners..etc):PM NOTHING INCLUDES SHIPPING. PM me your number and what you want a picture of or just PM for questions. Some of it may not be taken apart yet but we are working on it right now.

Hey every please check the forum in about an hr. We are working on a complete post.

Yes the 10mil has one. Basically brand new maybe 10 passes on it. We have not got to that bike yet. Pm me if still interested and I will update you.

GlenyBoy. I love that seat. I will get you a better pic in a few

Sorry my service was cutting in and out screwing up my posts

Sorry my service was cutting in and out screwing up my posts

Ok, we get it. Here's our info then. My girlfriend and I are getting out of the Sport for a little while and have 3 drag bikes and a lot of parts. I've got a shop called banshee sports which does business with Nate Mc Coy and adrenaline power sports. We've sold on here before under alkygirl and baddhabit57. You can check my ebay rating Furt3609.we have asked a few friends to through some references on here.

O

I will have to get the 4mil cheetah in a bit. Green one is the supercub other is 10mil. I am just looking to see what people are interested in: whole motors or parted. Thanks

Would you all like to see complete motors or parted motors before I tear them down? 3 bikes: 10mil Cheetah 4mil Supercub 4mil Cheetah

I have all of that pm me for what you are still looking for

I have a set. One out each side chrome with silencers. One of the hanger broke off was going to have it welded before I sold them but if your interested pm me.

I have billet or chrome stock pegs. Pm me if interested please put pegs in title.