Yvon Ladouceur

If its not a cheetha or a cub then what is it then Sent from my iPhone using Tapatalk

First of all i didnt do much damage the jug are nikasil and just got it onde I got the guy that fixed my jug to order the new vitos piston 68mm with a 6mm offset pin And as for the jugs they are not stock one they are ported to the max and also ported in the base Sent from my iPhone using Tapatalk

Is 110 too much Sent from my iPhone using Tapatalk

What type of fuel should i be using vp or pump mixed with vp Sent from my iPhone using Tapatalk

I had same problem Sent from my iPhone using Tapatalk

And i guess its a cheeta if its a. 465 Sent from my iPhone using Tapatalk

Porting done by Rocket porting Sent from my iPhone using Tapatalk

Yes its a 10mm stroke by vitos Piston is 68mm with a 6mm offset pin Sent from my iPhone using Tapatalk

Pembroke ontario canada Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

The guy where i am geting my stuff from piston looked like it was pre ignition Sent from my iPhone using Tapatalk

The guy told me 94 but figured. 91 was ok for one time thing kicking compression have no clue i will have my piston from vitos in a few days n then al be doing more testing but i still need info on what type of gas i should be using n what type of mixing oil should i use also n what type of oil should i use for clutch side and what type of prestone should i use also Sent from my iPhone using Tapatalk

Top gear couldnt get rpm up n sputerd trew 1st a bit and trew the other gear also on high rpm except the 6th always down shifting back in 5tg Sent from my iPhone using Tapatalk

Pipes cpis Chariots head Vitos stroker crank 10mm Vitos 68mm piston 6mm offset K&N 1/2 box 35mm keihen air strikers Main jet 185 Pilot do not know yet. Altitude is from 100feet to 500 feet asl Mixining ratio 32:1 klozt r50 91 octane on my first mixing of 25 litres but didnt get to burn 25 litres yet can someone help Sent from my iPhone using Tapatalk

How do i start my own tread Sent from my iPhone using Tapatalk

Also ported n polished to the max Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

This is my first banshee n burnt a hole threw the top of piston here is my setup I have cpis for pipes Vforce3 K&n 35 mm keihen air striker pwk 68mm vitos piston 10mm vitos stroker Main jet 185 not sure what pilot is?top end wasnt really good 5th n 6th alot of sputering I need help big time can some one help Sent from my iPhone using Tapatalk

I have a 465 stroker Sent from my iPhone using Tapatalk

I have jetting problem to Sent from my iPhone using Tapatalk