jeep.eater

So I worked on my bike for 8 hours today and tried every sugestion!!! and still nothing? even tried a shoot of quick start, just get a larger backfire, I also adjusted the timming from 0-+5 with no difference, 3 sets of new pugs- no change!!! when I check the plugs< they are soaked, I even took the reed cage back out and checked the boyesen valves I put on last year and they were fine too Does anyone have any more sugestions Thanks to every body that has tried to help

Im lost! why would that be the problem

It is a 200watt stator, from RM stator

I had 330s in it but switched them today to 300 hoping that might help, but still the same problem

hey guy's I am new here, so here is my problem? I have an 88 banshee, it was tierd last fall so I decided to rebuild it this winter, I sent my jugs off the vitos and they bored them to 65.5 and chapered the port openings, I also bought some of there super stock pistons. I also bought a cool head with 21cc domes, vitos water impeller,vitos power jet kit,vitos jet kit, a new stator, flywheel and coil, I also put on a new oversized rad and adjustable timming plate So hers my problem, finally got it all put back together, put some new gas in today, and it wont start!!! it has lots of spark( tried 2 different coils)it is getting fuel cause the plugs are wet when I pull them, i messed around with the timming and still nothing!!! can anyone HELP me