AAlamo

Sold

Clean set of 34 PJs with a billet intake and a set of individual stock intakes. Comes with a bunch of miscellaneous jets. $100 firm for everything. Text for fastest response and pictures 209-404-9706

250 shipped

I'm just trying to have him build a set of his in frame drag pipes that will contour to the adjustments I made to my Yfz frame. And it's a 4 mil stock cylinder dune ported by a buddy of mine. 36 lectrons, v force 2, plus 6 timing, 110 race fuel. I also contemplated calling Arlen at led but I'm pretty sure he's located up in Oregon right? I am on a time budget, pipes need to be ready to go by presidents weekend and Matt is within driving distance. Sully- still keeping those pipes as a backup lol and I don't have a Facebook so I'll have to ask someone to contact him for me on there Thanks guys

Hey guys I need some help getting in contact with Matt shearer. I need to have a custom set of pipes made for my bike. I tried calling the shop every other day for the last week, but can't get ahold of anyone. Left voicemails too with no luck. Could someone pm me his cell, or have him call me?

Bump This is less than the cost of a port job from any of the major builders, and it comes with Pistons.

300 shipped

Clean cylinders ready to bolt up.

Still for sale

Text for pictures please. Phone number is listed in original post

Bump 320 shipped

I've got a set of 4 mil dune ported stock cylinders, 66mm bore with pistons and rings. Also comes with long head studs for a pro design head. Porting was done by wild jc. Text for pictures 209-404-9706 350 shipped

Going to try something different here: going to offer EVERYTHING listed in the first post (except pipes) as a package deal. 315 shipped. A lot of good parts here that you can use or part out and make your money back. I don't need any of it so someone might as well get a good deal. Will also throw in a couple spare parts I didn't list. Make an offer on pipes

Stator and timing plate sold

Texted you

All prices are obo, please do not lowball me. Cleaning out the garage to make room. Please text for pictures and fastest response 209-404-9706 thanks Trinity stage 4 pipes and new style silencers SETUP FOR YFZ HYBRID. These will no longer work without modification on a banshee. However they are perfectly setup to bolt in on a Yfz hybrid. I will send pics of how my frame and a arms are setup for a potential buyer. Great pipes, I personally prefer them over the T5s. Stingers have not been modified and will still work with a banshee. I might sell those separate, but for now going to keep together. 550 shipped +pp fees 34mm keihn pjs that come complete. Needles, slides, throttle cable, hoses, jets (150-165 mains, 48-52 pilots). Over 140 dollars in jets, you should be good to jet for any elevation. Ran this on my 4 mil setup. 250 shipped K+n 4 inch pod filters for 33-35 mm carbs, worked perfect on my hybrid to clear shock. 40 shipped or will be included with carbs for free if asking price is met on carbs UPP style intakes with reed spacers for 33-35 mm carbs. 80 shipped Polished intake with crossover tube built in and boots for 33-35mm carbs. Unknown brand. 80 shipped Stock stator, timing plate and pickup coil. Works fine but crusty 25 shipped Start stop switch 35 shipped Chariot chain tensioner for yfz450 never used: 60 shipped Rear brake light bar for banshee: 30 shipped Quad tech seat cover for yfz450 seat and seat: 40 plus shipping +6 rear brake line: 25 shipped Pro taper fat bars with yamaha bar pad: 30 plus shipping Stock motor mounts and exhaust hangers: 20 shipped Thumb throttle painted orange with billet cover and extended lever: 60 shipped Thumb throttle completely stock: 25 shipped Carbon fiber look clutch lever and perch: 35 shipped If I find anything else I will post it up. Thanks for looking

Love my Troy lee designs cp5900. Super comfortable, can be worn under your shirt. Only problem is that it's 170.

Shocks just got done! Big thanks to Tim at Jet Motorsports for rebuilding them and powdercoating them to match.

Guys, the upper a arm is a lonestar arm with some "custom" work done to it (aka some heat and a big c clamp). This was done to clear the trinity pipes and I added a spacer behind it to keep the shape. I adjusted the upper heims to keep the camber at the right angle. Theoretically this should work fine how it is and for the 15 minutes I rode it, I couldn't feel anything wrong with the front end The box looking thing is an electrical box out of a yamaha Superjet Jetski. I wanted to condense all of the electronics to one box so wires won't be going to the rear of the bike (except for the tail light). Also, I can remove the box from the bike without removing the wiring harness because all of my connectors are outside of the box. 3 bolts and the box is out. I really appreciate the compliments, I've put a lot of time and money and thought into the design of this thing, and I'm sure it will ride like a dream. It is not for sale at the moment (I have gotten 2 pretty nice offers), but down the road it might be! Thanks for the feedback everyone

Been awhile since I updated this. It's been a long process getting everything powdercoated, rebuilt and ordered. Started putting it back together in late February a little at a time. so here are some pics of where I'm at now!

I'll give you 200 for it. I just can't tell if it was a good running or a great running motor

Levers and air filters sold. Carbs still available

Pmd

2 six inch k&n filters with angled flange for 33-35mm carbs 50shipped 2 four inch cone shaped k&n filters for stock carbs, perfect for a Yfz-shee conversion brand new in box, 60shipped Red asv f3 brake and clutch levers, 90shipped 34mm keihn pjs 220shipped

Like the title says, I have a set of good condition long travel elka stage 3 yfz450 shocks, front and rear. Sprung for a 200 lb rider. Looking to get 800 for all 3. Not sure if these will work on banshee a arms or not