mccarthy_21

I bought these for a yz465 warrior hybrid build, mounted, never finished project, bought a banshee. I want to sell for $85 shipped ($119new) or trade for 5/8 shank ball joints Text for pics thanks joe 605-208-4877

Got the arms man thanks....

Sold

Selling because im switching to pro circuits to fit my style of riding $190 shipped 605-208-4877 paypal [email protected]

$165 shipped

Ya please text for pics I was at stlouis for supercross all weekend and could get my phone to upload pics

No dents, white paint silencers need repacked. $190 shipped 605-208-4877

No dents, white paint silencers need repacked. $190 shipped 605-208-4877

Just a title says. I also have 22cc domes one good one has seen debris. 605-208-4877

Im looking to trade my toomeys for a pro circuit setup. I also got some 22cc cool domes for some 20cc. One has slight debris imprints Thanks. 605-208-4877

$25 shipped. I really need a set of 20cc have pics on phone

Any interest in trading a-arms? they are 400ex's but were on a 250r.... good shape just dusty.

Ones clean the other had some debris.... $30 shipped or trade for some 20cc domes 605-208-4877 for pics and info

Im interested in your a arms mostly http://www.trx250r.net/forum/sale/27299-duncan-silencer-other-parts.html allso have +2 400ex full flights they have yami ball joints for hybrid build

No i have not i am unsure of the specs

I did leak down test putting 6lbs in for 6 minutes and 4 after the 6 mintes were up. The compression was 30psi left and 60psi right. Upon tear down left piston was scored and both cylinders were beyond out of spec, so i punched it out to 65mm. Still same pronlem as before good psi though. I have oem cdi on the way. Will be inspecting stator area more after i make a puller. Does the 2 into 1 carb play any affect here. also posted on http://www.trx250r.net/forum/engine-transmission/21183-banshee-2-1-carb-engine-misses-left-cylinder.html thanks

desperate for advice. I purchased a 97 banshee saturday, and that day i never noticed it, i even felt the exhaust pipes, but it is not firing on left cylinder. The engine and exhaust are stock. Has stage 1V trinity 2-1 carb setup, new stator and cdi which is red i believe a ricks hot shot. All previously installed by owner. oh ya right sides warms up and sounds great, and left occasionally pops. what I've done: -cycled two new plugs thru Left side -checked spark, and both side have great spark, and i believe both sides fire everytime? -single carb setup getting fuel -check reeds look good -swapped plug wires for hell of it -searched harness for bad spots -grounds seem good -i could not find my compression kit, and this is cheesy but i could not hold my finger over hole, both sides popped off with resonable force. -could not get flywheel off to check key, my tool broke i even used a little heat and slight hammer taps. Granted i need to truly check compression what am i missing. please visit link for more info:http://www.trx250r.net/forum/engine-transmission/21183-banshee-2-1-carb-engine-misses-left-cylinder.html