-
Posts
50 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by Abdul
-
-
Hey guys
I have around 1000 $ , and I have a complete set of pipes (T5) and a pro flow kn airfilter.
So should I buy the noss head and ,v force 4 reeds, a bigger radiator and a adjustable plate .
Do you think that those mods will make a really big diff ?^
-
Thanks guys
-
So what is the diff between the two o f them?
-
Pro desgin or noss cool head and what is the diffrence
-
Any idea guys I need help what should I do , and the sound of the stock pipes changed.
Its a new banshee 09' do I really have to do a rebuild
-
ah man now you need a complete rebuild , goodluck
Why is it cause of the airfilter or what help guys please
-
+ 1 , 2 , 3 there are fine but when I hit the 4th gear really really low rpm I dont know what happened any idea ?
Does the idle have anything to do with this cause my brother turned it to the left I think o
-
Hey
I was installing my new O ring sooo I was so stupid I was supposed to use the drill put the nails so I used it and I drilled like 4 halls :/ and all of them didnt fit except for the last one .
So I've installed it and finished everything , but there ia like 4 halls in the airbox what should I do ?? Please help guys . + it didnt fit like 100% I have to push the cage so hard to close it HELP!!!!!!
Thanks
-
yeeah I meant the pro flow kitMine stayed in place withour anything.
He got the pro flow kit im sure.
-
Hey guys I've just got a k&n airfilter kit and it came with an O ring .
So , my question is do I need light film or something to make sure that the O ring will stay in it place ?
-
thank youYou should've ale to use 20's and stay on pump
http://www.nossmachine.com/banshee_heads.htm
Bottom of the page
-
I have a k&n filter and t5 pipes
-
pump gas , elevation : 2, 008 ft , 612mWhat's your elevation and other mods and do you want to run pump gas or are you willing to run race gas?
-
Are you serious guys ?? then any stock banshee is a 700
-
Hey guys what should I take 22cc or 21cc domes or what , i am mostly in the dunes ! And what is the difference? ?
-
then should I turn it to the left or to the right ? Can you explain it a bit more ?Must be it sounds like the dang tors you must turn in back for the engine run well to make not go fast when unwanted justmbackoff and go again
-
Hey guys
My stupid brother turned this into the left I think but I am not sure .
Can you tell me what is this exactly??
After he turned it , the bike doesn't stop it keeps moving even when I am not touching the throttle ????
I dont know how to describe it , its infront of the filter air box its like a small aluminum nail that u can turn it to the left and right ?????
What should I do ?
-
Hey guys finally I decided to buy the v force 4 reeds , so they said I have to rejit my carbs ?! What do they mean by rejetting my carbs and is it necessary?!!
Thanks
-
And do you think should I get 21cc domesfor my cool head ?
-
do you think a car temp gauge will work ??the only good thing about it in my opinion is the temp guage. there are cheaper options...
-
I know it wont make me faster , but do you think it worth 135$?both pipes are good cpi would be more of a drag pipe..
43.48 hp
cant adjust the stator without the flywheel puller
trail tech wont make you faster
-
Heey guys I have 09 stock banshee this is the mods that I will be doing :
1-what should I get t5 pipes or cpi? , I am mostly in the dunes
2-K&N air filter
3-v-force reeds
4-radiator 40mm
5-cool head
6-adjustable timing plate +4
How many HP will come out of this mods ?
Do I have to buy a flywheel puller and why ?
Do you recommend me to buy a trail tech vapor ?
-
Try to replace the sparks with new ones
-
thanks , should I get the v-force reeds ?As simply as I can put it is its a one way valve. Stops the charge from going back out the carbs.
new mods ?
in Banshee Repairs and Mods
Posted