Anthony133
-
Posts
133 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by Anthony133
-
-
Please PM me, i will not be notified of comments therefore i will not respond.
TEXT 708-224-8659 or email anthonyabbate@att.net or PM more more info AND PICTURES
-Rear Skid Plate- $20
-Gas cap with hose- $15
-Rear Brake Disc HUB- $30
-Rear Sprocket HUB- $30
-2 Rear Brake Discs- $10 each
-One Yellow front Shock- $20-Rear Shock Linkage- $30
-Cylinder Head- Professionally Cleaned- $40
-Front Brake Lines (Reservoir to calipers)- $30
-Front brake Reservoir- $30
-TWO Tors units- $20 each
-TWO Swing-arms- $40 each
-Carrier Unit with axle Drum- $40
-Reeds-$20
-Intake with tube-$20
-Steering stem with bar clamps- $30
-Clutch/Parking Brake Bar Assembly-$20
-Foot Pegs-$20
-Throttle Assembly (With Wires)- $30
-Throttle Assembly (Without Wires)-$30
-Silver FRONT Hub Set (Could Use Bearings)-$40
-Black FRONT Hub Set (Needs New Bearings)-$30
-4 Tie Rods- $20 each Set of 2
-Spindles-$50
-COMPLETE Silver A-Arm Set( 4 A-Arms, All bushings, All bolts) Everything to bolt on and use- $100
-Radiator with cap and hoses (Fins are in EXCELLENT condition, Professionally cleaned out, Painted) $40
-Clutch Cover-$20
-2 Plastic grills -$10 each -
One of my buddies painted his red, and looked GOOD, painted them last year and they still look good. He used spray paint from kmart. i don't know how it lasted but it did.
-
Left Heel Guard SOLD
-
Tail Light SOLD
-
Yes its finally for sale
My 1999 Yamaha banshee.
It has great compression and runs good. Has ALOT of power and is a blast. Sadly, im selling it for a 4stroke bike. It is currently dirty and plan on washing it soon. Especially since i'm selling it.
Mechanic owned and maintained, TITLE in hand
Mods are:
PTR ( Paul Turner Racing) full exhaust
V-Force 3 reeds
After market air filter
jetted to run without lid
Stainless steel allen head bolt kits
new water pump
new clutch
tors eliminator
moose racing bare
DG nerf bars
New front brake pads
New front wheel bearings
New spark plugs
it has 2005 limited edition fenders
New parking brake assembly
Radiator was got its fins straightened, radiator and hoses cleaned, NEW hose clamps.
Wire harness has been re-wrapped around sections that wore down.
it has Douglass rear rims
INCLUDES:
The banshee
Spare axle
spare carrier bearings
Extra swingarm
Extra set of foot pegs
Extra skid plate
Original TORS
Stock Reeds
An Extra set of Dunlop kt335 Rear tires
For all this im' asking $2400 OBO
just ask, worst i can say is no.PICKUP ONLY!!!!!!!!!!!
No trades
Call or text 7zero8-2two4-8six5nine
If i dont answer, leave a message
-
yea i know, couldnt hurt to get it out there first though
-
Yes its finally for sale
My 1999 Yamaha banshee.
It has great compression and runs good. Has ALOT of power and is a blast. Sadly, im selling it for a 4stroke bike. It is currently dirty and plan on washing it soon. Especially since i'm selling it.
Mechanic owned and maintained, TITLE in hand
Mods are:
PTR ( Paul Turner Racing) full exhaust
V-Force 3 reeds
After market air filter
jetted to run without lid
Stainless steel allen head bolt kits
new water pump
new clutch
tors eliminator
moose racing bare
DG nerf bars
New front brake pads
New front wheel bearings
New spark plugs
it has 2005 limited edition fenders
New parking brake assembly
Radiator was got its fins straightened, radiator and hoses cleaned, NEW hose clamps.
Wire harness has been re-wrapped around sections that wore down.
it has Douglass rear rims
INCLUDES:
The banshee
Spare axle
spare carrier bearings
Extra swingarm
Extra set of foot pegs
Extra skid plate
Original TORS
Stock Reeds
An Extra set of Dunlop kt335 Rear tires
For all this im' asking $2400 OBO
just ask, worst i can say is no.PICKUP ONLY!!!!!!!!!!!
No trades
Call or text 7zero8-2two4-8six5nine
If i dont answer, leave a message
-
Basically heres what happened: idiot i was riding with sunk his quad and was getting hypothermia. went back home, switched from bike to banshee. cold weather, barely warmed it up and took off with a heavy load of two people. I know it was a bad choice but someones life was possibly in danger. came home and it wouldn't shift into N. It would go straight from 1st to 2nd and 2nd to 1st. then me getting mad, i slammed down shifter and not it doesn't shift at all, just has alot of play in the shifter. Before i rip it all apart, any idea what broke? (besides my common sense)
-
Rear Brake line SOLD
-
Honestly cant remember if they are itp or douglass rims, i think they are itp but they look like douglass. Either way, they both have BRAND NEW valve stems, the both have their dings but do dents or serious damage at all. Both hold air without any leaks. The 10" looks great on any atv, i had them on my banshee and i wish i still had them on there. They need to be cleaned and polished but the do Polish up nice! Any questions please ask. They are 4/156 bolt pattern and is 6"/3" offset.
http://www.ebay.com/itm/111014264832?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
Price shown is what you pay!
-
Complete REAR Brake system SOLD
-
ALL 4 rear hubs SOLD
-
Bar mount & ignition SOLD
-
-
I currently use yamahalube 2 stroke, should i use something else?
-
Ok then make an offer, i NEED it gone
-
Needs to be cleaned and has a bent rod. Its getting replaced with a 4mil. $100 shipped
-
-
Tell me if your from BHQ!!!!
-
New List Posted
-
Heres what i have left and it all needs to go. Everything is stock and in great condition unless otherwise stated. Some parts will need cleaning All Prices are Shipped to U.S. ONLY
Text me, Email me, or PM me for faster responses and pictures!!
anthonyabbate@att.net
708-224-8659
I have:
2-wire Tail light- needs new red lens- $25
Ignition, Key, and Bar Mount- $30
RearSkid Plate- $20
Gas cap with hose- $15
Rear Brake Disc HUB- $30
Rear Sprocket HUB- $30
2 Rear Brake Discs- $10 each
COMPLETE Rear Brake Assembly (Caliper,Line,Master Cylinder,Resevoir, Pedal and clip) $80
Rear Brake Line-$20One Yellow front Shock- $20
Yellow Rear Shock- CLEAN- $75
Rear Shock Linkage- $30
Cylinder Head- Professionally Cleaned- $40
Front Brake Lines (Reservoir to calipers)- $30
Front brake Resevoir- $30
TWO Tors units- $20 each
TWO Swingarms- $40 each
Carrier Unit with axle Drum- $40
Reeds- $20
Intake with tube-$20
Steering stem with bar clamps- $30
Clutch/Parking Brake Bar Assembly-$20
FootPegs-$20
Silver FRONT Hub Set (Could Use Bearings)-$40
Black FRONT Hub Set ( Needs New Bearings)-$30
Throttle Assembly ( With Wires)- $30
Throttle Assembly ( Without Wires)-$30
4 Tie Rods- $20 each Set of 2
Spindles-$50
LOWER A-Arms ( With Bushings) $50
COMPLETE Silver A-Arm Set( 4 A-Arms, All bushings, All bolts) Everything to bolt on and use- $100
Radiator with cap and hoses ( fins are in EXCELLENT condition, Professionally cleaned out, Painted) $40
Clutch Cover WITH Water Pump- $40
3 Plastic Grill Inserts ( 2 black and 1 bright yellow)- $10 each
Left Heel Guard- $15
Both Axles- PICKUP Only- $50 each
-
I have a complete list of all my parts at home, i will upload them later with the prices. Thanks
-
PM's Sent
-
Since i have so many parts, im not listing prices. Pm me or reply for prices. we will agree on a price, there is NO bidding or anything like that,
Carbs for a 4mil?
in Banshee Repairs and Mods
Posted
Im starting to put together my 4mil project and need to know what carbs and what size i should use, any suggestions?