[Toomey 5's. Chrome preferably]

I still have em.

[Toomey 5's. Chrome preferably]

I have a nice set of T5's with polished cans pm me if interested $350 + shipping

[Looking to put my Banshee on Alky]

I want to keep my carbs they only have 2 seasons on them

[Looking to put my Banshee on Alky]

Like the title says...besides putting power jets on the carbs whatt cc domes do I need to run is there a preferred squish I should shoot for. My motor is a Dune port 33pwk CPI i.f. I normally ride 1500 elev. Any help and or direction would be appreciated.

[Banshee rear axle shaft]

I have one off my 04 but has a slight wobble. Finding a straight one other than new idk. PM me if you are interested

[Got a huge problem need help ASAP]

I'm with Cam, first thing I thought when you described damage was detonation. Holes in piston = detonation not good

[Cracked piston]

I have my clearance set at .003 on Wiseco forged pistons. Be sure to warm the motor before you rip it at wide open.

[Clutch]

Buy a clutch his info is right above my post....

[Wiseco Pro Lite Pistons 64.50mm]

Ouch the skirts are all scuffed to $hit

[POLL - How old are the HQ members?]

46

[best oil for crank?]

Trans-ATF Type F

Per mix Castor 927

No problems with running these lubes

[Cleaning Grease]

WD-40 works great on everything to get rid of grease on frame and on chromed pipes

[Can a thin base gasket make a huge compression change?]

is that a .055 squish on a gas drag/dune motor....sounds pretty tall but if it runs hard good to go. My motor is at .041-.042 gas motor drag/dune.

[Duneable overrides]

I've ran A WCR Extreme dune able it was ran 3 runs down the strip yep...sent it back he got this one close but if you hot lap it, won't shift under power so it needs to cool then hit the strip again. IMO either by a full override or not at all

[2006 Mint banshee for sale lots of mods!]

How bout just post some pics

[going back to 2 carbs]

33 PWK's are what I run also on a mild Ported motor

[Jetting for new pipes]

That what I thought... my wife likes them quiet lol

[gearing]

13-41 that would be gearing for Motocross...with your motor and rider weight you could easily run 15-40 gear...put a swinger on that Bitch with some aggressive paddles and let it eat

[Jetting for new pipes]

I have another? My buddy had bought a set of CPI's quite a few years back and he took the perferated pipe out of the muffler and replaced it with a solid piece of pipe no holes. Will that have any better performans results of just make the exhaust louder. These are CPI in frames.

[Bought 15/40 gears]

WOW jbird give the guy a Fuckin break I think his ? was lagit ...

[Awesome customer service from the guys at F.A.S.T. Racing!]

Jeff and his crew won't bend you over like other guys dealing parts and service, I have been dealing all my parts and machine work with Jeff for a few years now and also very satisfied... A+ business.

[Jetting for new pipes]

I'm running 32:1 50/50 vp110 91 pump I added the fuel was mixed in march

[Jetting for new pipes]

What a Fuckin amateur ^^^^^.....go back to your hood, If you don't have a clue don't post!

[Jetting for new pipes]

I'm PIG RITCH 33PWK 155 main 45 pilot 2 turns out on air screw neddle CEL on 3rd from top....First ride on new build...CPI inframes are gonna be a FUCKIN Blast in the sand , My Question is my pipes were drippin... I was runnin the bike short burts up to full throttle and shifting  the fuel I was running was mixed earlier this winter before it got cold but was in my heated garage not on the floor but on carpet what is my jetting change or should I mix fresh fuel.

[got some 1211 silicone sealant on the crank webs]

19cc will get ya 180 psi on gas