fbt551
-
Posts
132 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by fbt551
-
-
How much for your aluminum bolt?Ive got an aluminum one if interested
-
Drag axle jja pref
14 stag SLS extreme tires
Front 18" SLS tires
OEM square plug stator
39-41mm alky gravity carbs
Dual pingel valve
Aluminum heims
Override trans 2-5 n down
Pm pics or 9282879035
- 1
-
Still avail?
-
I have a set of race logics
-
Looking to get a set of domes cut for my 7mm what sponsor would you guys recommend?
-
There are track restrictions on type of cylinders per category that's why I was wanting to stay stock cyl
-
So they shave some off of the base? I would get is to sit at 0 deck height and just the the head cit for alky between .040 and .050Last one I put together was with 70 mm wsm pistons it sat .005 below deck with .020 base , a lot of the old 370 shit I have seen has been decked some on the bottom side cylinders
-
I wouldn't mind putting the time in myself but I sold my milling machine and don't know what else I could use to make it work besides cutting the cylinder apart and welding it back together I hear some just epoxy the front weather jackets and go about it that way
-
Ya they're on 68mm sleeved cylinders
-
Looking for triple exhaust on a set of stock cylinders anybody know of a shop that will do just that?
-
Text me 9282879035
-
Looking for
*7mm long rod crank forged or billet
*Under stock cover lockout
*39-41 gravity alky carbs
*Drag axle
*14 staggs extreme 76+ro
*drag tank
*dual pingel
*2-5 override
*18"SLS tires
-
Head has already been cut I was just wondering if piston sits a little lower on 370 motors they use blaster piston and 115 rods
-
Blaster pistons...370 is stock stroke 115 rod...was wanting to use a .020 gasket but no gasket piston already sits .020 below deck.. With gasket it will sit .040 below and my squish will be like .090
-
Im putting together a 370 built for alky the piston seems to be .019-.020 below deck height at tdc and the head has about the same at the edge of the squish band I am using sodder about .070 thick and its barely touching when I rotate I've checked squish before but its not making sense i was also using a .020 base gasket but it wasn't even touching at .070 so I took it off and that's when I got it to touch the sodder any ideas?
-
I'm looking to trade my in Frame shearers for Sb in frames or Sb out frames (shearer)
Would also consider 14x paddles 74-81ro
Jja drag axle
Drag tank
-
Looking for good condition stator square plug...OEM pref but aftermarket will work if priced right
-
I think they're charging 275 with core nice they have a fast turn around been thinking king of a single arm setup from them also
-
Open to options what do you have?
-
What's are people's experiences with these overrides they are well priced but wanting to know how the quality is on them looking to get a 2-5 n down
-
-
Alright thanks...bought them for 7mm 68bore but was thinking of interchanging at track
-
He can receive new messages
-
I send you a message with picturesi have a set of very low hour t5's looking to trade for t6 pipes chrome must be perfect. the t5's i have are nearly new but do have one small dent int he bottom from the motor mounts.
may trade for other pipes but really only a set of perfect, pro circuit, shear, SLP, or sniper. prefer t6 tho
Drag parts needed
in Wanted
Posted
Drag axle jja pref
14 stag SLS extreme tires
Front 18" SLS tires
OEM square plug stator
39-41mm alky gravity carbs
Dual pingel valve
Aluminum heims
Override trans 2-5 n down
Pm pics or 9282879035