Jump to content

joshuadgallardo

Members
  • Posts

    45
  • Joined

  • Last visited

Everything posted by joshuadgallardo

  1. All pm's replied to. So far the flywheel, amd parts transmission are sold. The cases are pending. Everything else is still for sale.crank is a hot rods crank. Cylinders are matched to fit crank for maximum performance. All parts came off a 1999 yamaha banshee. All were in working order no problems. Shee was a screemer. Also have stock pipes that came off it. Thanks for looking
  2. Parts transmission sold. Cases i believe are sold, flywheel is pending. Everything else still for sale
  3. Does not. Theyre being sold separately
  4. none that i seen so far no chain breaks looks like a good usable part to me .
  5. clutch hub basket pressure plates lot 5 pairs outside and inners. $60 obo http://imageshack.us/photo/my-images/534/20120311223410846.jpg/ cool head http://imageshack.us/photo/my-images/534/20120311223212356.jpg/ transmission parts http://imageshack.us/photo/my-images/861/20120311223117402.jpg/ pistons http://imageshack.us/photo/my-images/843/20120311222950346.jpg/ cylinders http://imageshack.us/photo/my-images/839/20120311222428785.jpg/ http://imageshack.us/photo/my-images/856/20120311222350230.jpg/ http://imageshack.us/photo/my-images/825/20120311221754489.jpg/ cases http://imageshack.us/photo/my-images/716/20120311221930830.jpg/ http://imageshack.us/photo/my-images/252/20120311222027529.jpg/ http://imageshack.us/photo/my-images/21/20120311222102888.jpg/ http://imageshack.us/photo/my-images/860/20120311222319616.jpg/
  6. im not using a feeler gauge to gap it i just put a thick piece of metal in there and yes it is equal on both sides. theyre pretty tight, does it use washers? i dont have washers maybe its loosening not to sure?
  7. i tried and it says that the file is to big to upload
  8. Hello i have decided to part out my banshee motor, i have listed the parts that i have below with prices i believe are fair. all prices are without shipping. only shipping to u.s 4 mil long rod crank has no play in rods and is still in excellent condition $300 wiseco pistons (4) 2 are brand new and the other two were from before probably junk the new ones have circlips bearings and rings. pistons are 66.5 $125 cylinders both have sleeves in them and are bored 66.5. $100 cases have some wear but do not leak and are in fair shape will come with brand new seal kit $100 stock transmission never used purchased from friend known to be good $100 Stock flywheel $50 i have about 5 stators however the pickup coils are all missing and will need new ones. $25 each or $100 for all of them may have more have to check. Clutch cover with gasket $40 clutch hub basket pressure plates lot 5 pairs outside and inners. $60 obo Pro design cool head with 19cc domes with brand new o-rings $175 also have old transmission for parts have the shift drums and fork assembly $50 kick start gear (2) $20 each Motor is pretty much ready could be sold with all extra parts for $1000 also i have an old junked up seat that came off banshee missing a piece of foam i was told you could just put new seat cover on it and it will still work or use more foam to fill it selling for 20 obo still has latch just sun ate it up. have two rear sets of wheels 20 in tires that have gold rims and one front tire came off moto 4 but fits on banshee pattern also with gold rim that does not look as good as rears. tires in back are pretty bald but rims are worth $50 each or $100 for all three of them. May have other parts just ask me havent really gone through all of them yet. thank you for pictures email me at [email protected]
  9. and i took off the flywheel with a flywheel puller that i bought
  10. i have tranny cases and crank, crank is 4 mil long stroke. 500 obo let me know [email protected]
  11. hello i am interested in the stator with adjustable timing cover if you could send me pictures to [email protected] and if 70 bucks would work
  12. It is the little magnet of pickup coil that you have to gap from flywheel . The one that sends pulse threw electrical system. I have not tried to test the crank as i did not think it could be that (hoping anyway it is brand new motor). Could it be the adjustable plate that is bent where stator connects to?
  13. I am in need of help with my Banshee. Ive gone through 6 stators because of the pickup coil The magnet keeps popping off. Ive tried spacing out more ive got another known to be good flywheel. The motor is brand new so i dont think it can be crank that is messed up. I was wondering if maybe bent timing plate can cause this? I dont no what else to try please help
  14. Hello i am looking for a stator and adjustable timing plate somewhere in range of 75 dollars. If someone can help me out with one it would help me get my damn banshee going again. Thank you also to reply back please email me at [email protected] i rarely check the site. Thanks
  15. Well i just checked crank and it was fine this is brand new motor. Also gapped the pickup coil with a piece of cardboard good amount distance didnt really measure or anything. Ordered new flywheel but wont be here till next week:/
  16. Makes a tiny tiny noise but can that be problem why pickup coil keeps busting?
  17. Hi i am new to the forums thing but i am trying this to see if anyone can help me out with my shee. I have recently bought 5 stators. 3 of which the pickup coil completely disintegrated. Eachof them have all messed up in same place. Where the magnet comes out of pickup coil to make spark with flywheel. Each one has had all plastic torn up and all copper lining inside torn out. I do not no what this can be? Can a bent flywheel be the problem? I am lost please help only rode the thing for 20 mins max
×
×
  • Create New...