devon

Figured it out I'm a dumbass a coil wire came unplugged but I have another ? My banshee is horrible on fuel is that normal I mean like I ride 8 to ten miles on a half tank all that is done is pro circuit pipes 30 over and 2 holes in air box

No all my friends ride 4 stroke Hondas but 2 stroke runs in my blood lol

i think i need a new cdi box anybody know where i can get one cheap

Got it running like I said I don't get it readjusted carbs and kicked it fired up 2nd kick runs like a champ but I built a leakdown tester so still gonna try that just to see

K I will. I wish I had someone close to me that could help me out everyone keeps saying take it in take it in but I'm working with a limited budget u know

Now its backfireing our the pipes I don't get it I'm getting friggin pissed

How much to ship

choke tube is there so ill readjust the carbs and go from there thanx guys this is the best site in the world man and i hope some day i can return all the favors and soon im gonna up grade to a premium member

i just did the carbs but i had a buddy help me with the tuning and i am just no sure he says i need to up my pilot

brand new

brand new

it dont want to idle and it is hard to start

And how much for those pipes with shipping and what r they

Well I just bought it and put rings and pistons in and I won't run right the needles are all the way up and air screws r out three turns with 200 main and 25 pilot

Well I just bought it and put rings and pistons in and I won't run right the needles are all the way up and air screws r out three turns with 200 main and 25 pilot

please some one help me im lost and affraid to burn it up

I'm at 794ft and my banshee is stock other than its .30 over what should I set my carbs at

PLEASE REMEMBER IM NEW TO TWO STROKES so i only had 105 psi in both cylinders so i bought new pistons and rings i figured just to freshin it up. so i put bike back to gether no go wont start check compresion only 60 psi both cyclnders WTF so i call my guy who runs a little bike shop he says not sure bring in your pistons and jugs and i will measure them so i did and guess what its .30 over DUH so what did i learn measure your bore first dumbass before u order new parts

so finally got my banshee running and now time to fix other stuff my stock shock is shot anyone know where i can get a rebuild kit since aftermarkets r not in my budget yet

i think i got a good deal on some carbs what u think the are stock but the come with twist throttle and cable and torse eliminater kit for 75.00$

i know and it wasnt the choke tube it was the one on the bottom

think i figured it out some one had the overflows linked together on the carbs so it was just poreing fuel in the left side thanx guys now i can start moding it ang suggestions were i should start

no i did not get rid of the tors system im new to banshees not sure what to do to it yet but i know i want to get it runnung right before i start moding it. i did switch plug wires and plugs no diff. what cable r u talking a bout the choke tube is fine to carbs r clean almost to clean kinda wierd

im not sure of my elevation but im in mich and my reeds r brand new i just put them in yesterday