jamieg45

Ok I looked up prices and what I do is split new in half and then judge there condition of the part and go from there on the price. The shocks are like for the fronts $1600.00 new and the rear is $1100.00 new. and the aarms are $600.00new but with no tierod ends and no spindles, or hubs and rotors, or complete brake system at all. so sorry all but this is how I judge my parts and I will not sell crap either because I dont want crap sold to me. More parts prices Douglas beadlock rims with holeshot mxr4 tires $500.00 shipped Trinity 2 into 1 carb set up with a 35mm keihen carb and airbox adapter and airbox $325.00 shipped stock clutch baskets $100.00 shipped stock clutch covers $100.00 shipped stock carbs motor mounts a-arm bolts, swingarm pivot bolt, stock axle nuts, and the list goes on. I will ship either by ups or postal. and the frames will be cheepest to ship by frate to a business. Motors will be crated up when shipped and all parts over $100.00 will have insurance for there value so you as the customer and me as the seller is covered if damaged or lost. And I can ship plastic better and cheeper that anyone can find, i do shipping for my job and get some help from the boss as needed. so I will be as honest as possible and give the best prices as parts look to be.

I xd not know that really, then what we they worth, fresh rebuild.

Ok all here goes the price list. LSR +2+1 chrome upper and silvervein lower a-arms with spindles, hubs, Brake lines, calipers, and ressi. All for $600.00 plus shipping Used durablue axle $150.00 plus shipping Brand new durablue axle $250.00 plus shipping Frame with vin numbers $300.00 plus shipping ( I just bought this frame like 9 months ago) Old 2001 mx race chassi with a slite bent upward subframe, no vin #'s bought new from Yamaha $150.00 plus shipping Elka stake 4 shocks but without the high speed adj, set up for 250lbs a mx rider $1700.00 shipped 2 sets of 95 banshee plastic complete uncut set for price? race set complete price ? Mx motor complete w/ coolhead, vforce reeds, 17or18cc domes, flywheel, stator, wiring harness, cdi, coil, and headlight/on/off switch, and a new top end when it comes back from the shop. I will sell for $1700.00 plus shipping Ct 370 bigbore motor turned to a vitos 420 big bore motor with new trans, clutch, aftermarket clutch basket, coolhead. Needs new pistons and coolhead orings kit and base gaskets (takes 3 oe thickness base gaskets) and cylinders are polished, clutch cover is polished, and the coolhead is polished and anadized purple. Plus it comes with the complete wiring harness and msd coil, cdi, stator, and flywheel. $900.00 plus shipping I will add more parts as I go through all of them, I have many new still in the yamaha bags, such as kickers, and nuts and bolts, and much more. I will try again tonight to post pics but for some reason its not letting me too, if someone wants to help me out it would be greatly appreciated.

I had so many of them when i woke up this morning, I will pm all back when i get home from work. And i need to say that the ac skid, dg Nerfs, the polished cascade grill, and the front bumper are already gone and so is the pipes. But everything else I posted and much more I have. I still have oem parts in the yamaha bags. And i have so many stock good shaped parts, rear links with all bolts, I have a set of like new black headlights, I will make a list as i am taking pics of the parts. I just have so many parts for the banshee, I had 3 I could ride at one time, and i have parted out so many to. I have dune rims for the yamaha, only rims I am keeping the tires for my homeward I am building. Well i will post as much as i can starting tonight and thru the weekend, ok all. And thank you for all the interest.

Thank for the help guys, I will be putting a price list up tonight, and I will have pics for all ASAP. I am currently at work now.

Thanks dumbshit, for gewtting the pic to come up, I appreciate it very much. I have no clue why I can not get pics to post her from my photobucket account and I can on atvriders and trx250r.net. But thank you very much and this is the banshee I am parting out, but the pipes in the pic is already gone and so are the dg nerfs. I was getting ready to redo and just have some other thing to take care of rite now. My nephew is not very happy with me because this was sorta gonna be his quad but I told him we will build a lsr outlaw chassie later and it will be better than this one. But for now he is in love with the womans full hot pink lsr honda trx 250r, and hes not that kinda boy but he loves the color pink. so npo smart ass comments about a 13yr old boy, please. He loves this forum and all quads, thank you very much.

Can someone help tell me how I put pics up please and thank you, I really want to sell these parts and I know I didnt put any prices up yet and that is because I want to see the interest on the parts first. And I cant seem to figure out how to post pics either.

[/img] Ok everyone I am putting a feeler out there on my mx banshee, I am gonna part it out. Here is what I have rite now and then some, a complete mx motor its gonna have a fresh top end (coolhead, v-force reeds, 17cc domes, stator, flywheel, and complete wiring harness, unless I seperate the stator and wiring from it). A 420 big bore motor that just needs pistons and reeds, has a cool head and custom domes, it started life as a ct370 longrod motor built by ct and then turned into a vito's big bore, with a aftermarket clutch basket and a new trani and the bottom end has just been gone through and all is polished too. I have a trinity 2 into 1 intake with a 35mm carb like new condition, a set of stock carbs with the tors eliminator kit and different needles and all and the idle screws in it. Elka front and rear shocks just rebuilt set up for 260lbs, durablue axles one new and one used, lsr sprocket hubs and brake rotor hubs, polished alluminum side covers, inserts, thumb throttle cover gas cap, break ressi covers, and more. douglas beadlocks with holeshot tires, +2+1 lsr a-arms with spindles and hubs, aftrmarket brake lines, and all nuts and bolts for a whole banshhe and a few more, 2 frames 1 with vin numbers and the other new from yamaha with no vin. Brand new ac propeg nerf bars never mounted with blue nets, 2 complete 95 plastics that are purple and yellow. gas tanks, 2 seats, aftet market stems that take honda trx 250r top clamps that come with fwtbar clamps ( 1 is fresh from the chrome shop and the other is powdercoated silvervein) radiators, stock carbs, clutch covers, headlights and much more. I will post pics tomorrow and threw this weekend, But if you have interest in anything message me and I will email pics so much better than posting on here, or call or text me at 269-362-2458 Jamie is my name. I am wanting to sell all of my banshee part beacuse I need to get a car for my woman and a engagement ring for her. And I will still have my 2 full aftermarket honda trx 250rsto ride, 1 for her and 1 for me.

To the top yall.

Ok sorry guys I was not triing to upset you all, I forgot the prices. And I have tried to post up pics but for some reason it wont let me and I even made them smaller off of my photobucket. Cases with all nuts and bolts $200.00 shipped Clutch cover $65.00 shipped Clutch basket $75.00 shipped stock carbs $50.00 shipped Rear stock hubs $40.00 shipped Radiator with hoses $40.00 shipped Tail light with cascade polished license plate and mounting hardware $35.00 shipped Stock gas tank with a bolt stuck in the plastic mounting point, with petcock and top $25.00 shipped brake calipers front and back diamond plate skid plate but no mounting hardware $30.00 shipped Stock head with the nipple on it for the coolant $30.00 shipped Rear brake rotor and hub $20.00 shipped I have 2 or 3 of them front hubs and rotors in good shape and bearings good $45.00 shipped ceramic coated 88 foot pegs, looks like chrome $30.00 shipped There is more just ask and I will see if I have it, I do not have any stators or coils or cdi's, and no flywheels either, I do have a few old style headlight and on/off switch controls I will cell. They work and are not messed up at all, old style is the round plug. And I only ship to the lower 48 states for the prices posted, I will ship anywhere as long as you are willing to pay the extra shipping.

I have a set of real nice 98 cases with no breaks or cracks, I also have a nice stock clutch cover, stock clutch basket a rebuilt stock rear shock it has a little ride time on it ( it was on my girls quad). I have stock carbs, stock like brand new head, rear hubs, front hubs, brake calipers, and much more. I am cleaning out my parts lot because I am not racing anymore and dont need all these extera parts, and I am having trouble uploading pics. So if you want pics I will email them to you on request. Make offers and I will get back with you as soon as possible or text me at 269-362-2458. Plus I have an axis rear shock and a aftermarket rear grab bar too.

Sold tusk rear brake rotor and cascade clamps, come on everybody need to get rid of this stuff. Make me some offers

I have 17cc and 22cc domes for a cool head $35.00 shipped

I have 01 frame I bout that the sub frame is amorphous tweeked up ( evenly ) it can b straightened, no cine when you buy it new from yamaha. I will do $375 shipped, it was my motorcross frame. Let me know I can email you pics. Thanks Jamieg45

I still have what is left make offers if you want something, I do have a axis rear shock just redone, a tusk rear wave brake disc, and cascade exhaust clamps plus some more. Txt would be the quickest way to get ahold of me it is 269-362-2458

I figured they were hard to come by, I should of jumped on the 1 that I had a chance to buy at Red Bud Michigan mx track for $7000.00 complete with a complete duncan set up. I just though that I wouldsee if anyone had one that they wanted to get rid of. Thanks for the help it ir very much appreciated

I am Looking for a Lone Star Racing Outlaw rolling chassi, you know the 250r geometry atv that takes the banshee motor, Radiator, gas tank, seat and plastic. Or if anyone just has a frame it would be great.

Yes I do, sorry I have been out of town for work. I have the fatty pipes and turbin core II's left with polished cascade clamps and the silencer mounting hardware for $325.00 plus shipping.

Great buyer, pays quick. Thanks and enjoy

I have a set of 95 plastic, front race cut and rear untouched. They are purple and I only want $50 plus shipping. For pics send me your email and I will send the pics to you, for some reason I can not post pics.. Sorry I tried

I have a set of stock front race cut and rear fenders that are the purple from the 95 banshee, I want $50 plus shipping if you are interested.

I have a 2002 frame that I was gonna get lightenedup for my woman to drag, but she wanted me to redo her LSR 250R for her, I am located in MI and I will be in Springfield IL to do some parts trading if you still want a good drag frame. I got a straight frame to redo my old mx banshee to make it a duner now for silver lake. The subframe is slightly tweeked up from a holeshot only on 2 wheels and beeting everybody off the gate. It was a new frame srtaight from Yamaha in 02 with no numbers that is how they come. I am selling this for $200 or best offer. My cell# is 269-362-2458, you can txt me or send me a massage if you are interested or if you are not, and I can send pics to you if you want.

Yes i do, give me your email and i will send you pics