cunninghambc

Wondering if people are runnin on the ice? Where at and when? I live about 2 hrs from anchor bay so if I drive that far I want to have a few people to race and plowed ice

black and red one with red frame...

it was a good time to bad the drag strip was so bumpy! but still had alot of fun racing

where is this place and what is it exactly??

34 mm pwk ported 350cc stator side is blowing milky stuff out the pipe and hardly running can this be caused of being to rich or is there water getting in that cylinder??

ok thanks I was usually around 5lb but maby thats a bit high. and even running that low you don't have to worry about tires spinning on the rim?

i have been told both ways and have alwayes went lower tire pressure more bite. what have you guys been doing or found works best?? i aloso got an overidde over the winter and was wonering what i should be expecting to pick up in ET? it ran consistent 5.0et last year and im not that great or fast at shiffting iv been told 3tenths but that seems like alot.

i would trade you some shears if them were silenced!

had a great time at phils last year and would love to run asap this year. now i got and override and itching to see how much it changes my ET

I like 5.0 or faster that puts me right on the edge and i would really like to run one more this year. last time was a blast!

I know I could split the cases and get it done pretty quick but I wanna get an override and dont really want to do it twice

sorry guys but i might not be bringing the bike now i just put it back together and in no more then 5 min of riding it down the road i welded the clutch rod again! this is my third time in one year and i also had a pancake bearing this time! at least im good at something

i dont have a drag bike but its fast i can usually beat the 450's at the dunes if i get a good start

ill be there all weekend gunna try to hit T&T on friday if i get up there early

hey switched my kehin 34mm carbs to alky just wanted to see where some other people are at with there jetting it was really fat and sputtered on the top end but seems to screem now im just scared of being lean lol here it is! iv got a ported 350 stock cylinder stock head recut 165 cranking comppression vforce reeds shear pipes + 7 timing 34mm carbs 55 piolt 2 turns out on the air screw needle as rich as it can go dont remember the letters on it lol main is drilled to .83 carbs are drilled and taped on the side for a power jet but its just a main jet drilled to .60 i started with a 155 main for the power jet but it would studder really bad on the top end

Lol just kidding!but I thought that my tires have been just spinning like hell! Took my clutches out and found 3 broken plate's and my steel's were burnt to shit!

wow that guy with that little 350 ant far behind!

Ok well ill have to call the police station that impounded it and figured something out. the original owner had the title and got the quad back then resold it and i pretty much rebuilt the hole quad so i knew what was all done to it! I hope the original owner is trying to pull some fishy shit cuz ill get a lawyer and sue that bitch!

long story but I had a banshee impounded july first of 2011 turned out it was hot and i never seen it again until about a week ago it was posted on craigslist for sale kinda in my area. My dad bought the quad back and got a title this time lol but the vin number is still ground off the frame. So my question is does anyone know if or were there are any hidden vin numbers?

Anyone know what time T & T is on friday?

That bike looks nice man! my best run on mine was a 5.0 pass at 59 mph with shearer in frame 34mm pj +4 timing on 93oct cut stock head 15t 45t plus 8 swingarm 22 11 10 ten paddle extreme's. Hopping with some tuning and setup change I could get into the 4.9s

Sweet them are some pretty good times im a little ways from running that quick but ill have to checkout your bikes to see what your doing that im not! ( besides the 4 mill crank)

Lol hey wes im sure I could get a dune ready for you if you wanna bring that red chevy up on the sand. Maby even jump it a few times!

I have a stock cylinder 350cc and would like to see how it does against some of your guys bikes its still pretty heavy and stock transmission no lockup but still a pretty fun ride! If you don't mind me asking what do your bikes run in 300ft? ill been there later on friday!