evorulz

found the problem i was missing a tube that goes between the two carbs and the right side was running lean it must of fel off when riding thanks for all ya help

I have just done a topend rebuild on my 2001 banshee and i got it started and it is backfireing from one cylinder and the other is still runing and blowing plenty of smoke i have tried pulling the carby's off and cleaning both idler jets and main jets (and the carby's are the standard eletric ones to) and it won't idle and it is really hard to start. i have tryed switching the spark plugs around and it made no diffrence, it has plent of compression and spark and i dont know what to do next Plz Help

switching the plug leads made no diffrence and the fuel made no diffrence

i just disconnected the 2 sets of wires to the carbys and it made no diffrence to the bike and i have checked the slide and it is in the right place thanks for your help keep it comeing

Yes it still has the tors conneted and i will try disconnecting them also the bike is really hard to start and some times it wont start and has to be push stated, but if you hold the throttle open and pore some fuel down the carbys it will start, i have checked commpresion and spark both are good and it has new spark plugs when you ride it around it feels normal than one side will backfire anfter about 30 seconds of riding and the other side cylinder will just keep running.

I have just done a topend rebuild on my 2001 banshee and i got it started and it is backfireing from one cylinder and the other is still runing and blowing plenty of smoke i have tried pulling the carby's off and cleaning both idler jets and main jets (and the carby's are the standard eletric ones to) I dont know what to do next oh and it won't idle Plz Help