bansheeboie

Ok I dropped the main to a 155,52 pilot,cel needle 2nd from top,a/f screw1.5 out. It fucking rips! I'm not sure of its lean bc I haven't been able to ride it up long or get out of 2nd gear yet. I may go up to a 158 main just to be safe when I do plug chops at 1st. The cel needle in the middle was too rich, moving it one clip up cleared it out

Lol 10mil 535 cheetah pv drag/dune ported by WK racing on race gas. Goin all out on this build over winter starting now. Just trying to decide on pc color for the frame,hubs,sprockets,etc etc...

Thanks.Yea I got these on a bike I bought and was Gona set up but am now parting out getn ready to build the 10mil from ground up instead!

Bump 425shipped on drag ported 4mil topend! (cylinders,pistons,domes) Hard ass running setup porting alone wud cost this much!

I have a set of chrome +2+1 arms. Unsure of brand. Comes with tie rods,ends. Chrome is in good condition couple of blemishes but shud clean up with some polish. They are fully adjustable, can fit stock length shocks or longer shocks. I have a set of triple rate Elkas on them now and they fit without problems. Believe the Elkas are 17.3/4 long but don't quote me on that as I'm not 100% sure they are still attached to the bike-325shipped

Headlights and tail light sold

Pm replied

24.complete wiring harness(cdi,voltage regulator,stock coil) came off a 2000 I believe.-make offer 25.thumb throttle-30shipped 26.x2 hand guard mounting assembly never used (power mad) not sure what these cost-make offer 27. Oversized gas tank-100 + shipping 28.honda radials and rims, still have some life left(50%tread)18-10-8-100+shipping 29.kenda mxr rear tires(50% tread) 18-10.5-9-75+ship 30.key switch and housing(no keys)-25shipped each 31.rear tail light-35shipped 32.complete aftermarket plastics, Yamaha blue n white.not sure on brand.Needs a cleaning-200+shipping 33.stock banshee headlights off a 06 S.E(in the picture above with plastics)-40shipped

23.35mm pwk air strykers(slides,needles,springs,caps,jets)-315shipped

Yea I bought my BB shearers and a set of NGK plug caps from him for a steal. Cool dude, great to deal with. Always a pleasure doing business with em.

I wud fuccin love to have these for my 10mil cheetah but unfortunately there too many damn whoops were I ride at. Glws these are nice pipes

I ran the with no problems, I don't think there leaking at all but I will check tomoro morning to make sure. If they are then I will correct the post. Thanks for the heads up phelps.

Mag have what u need. Get back to u tomoro with pics

Oem stator and flywheel-175shipped pm me if interested

75shipped on stator

12.stock carbs(needs needles,slides,caps,springs),stock reeds,stock intakes,boost bottle-65shipped 13.clutch covers/35shipped-stator covers/25shipped 14.66mm ported/polished stock cylinders(need bored/honed)-90shipped 15.stock airbox with k&n filter-65shipped 16.stock a arms,hubs,spindles,tierods. Paint is chipping,arms are straight not bent,boots are good not ripped or seized.-115shipped 17. Front master cylinder and brake lever-30shipped 18.works shocks(stock length) came off +2+1 arms. Missing one bottom bushing-175shipped 19.dogbones-20shipped each 20.toomey 2into one high flow filter-65shipped 21.cdi box, not sure what year but in good condition-60shipped 22.extended stock foot pegs-35shipped

Cleaning up a lot of parts I have sitting around that are not needed. Will be adding more to the list daily. 1. -2 stock style swingarm with carrier,chain glider,chain-150shipped obo 2.nerf bars with good nets either pro armor or dg-70shipped 3.ct racing inframe chrome pipes/silencers in good shape. One dent to fit, but doesn't affect anything-300shipped Dent 4.64mm wsm 4mil long rod pistons(like new)-115shipped 5.pro design 34mm billet intakes-75shipped 6.34mm keihin pj's(complete)-150shipped 7.a arm/swingarm skid plates-100shipped for both 8.stock airbox with pro flow setup and filter-65shipped 9.stock radiator with hoses(I have 3)-25shipped each 10.pro design coolhead-125shipped 11.stock cases no whack-150shipped

Bump! Bottom end pending

Ok got it running better has good power throught 1st gear but when it goes into 2nd gear and I push the throttle it begins to die down, shud I go up on the needle and make it a leaner setting to clear this out? I went down on the needle earlier and it ran like shit!! Wud not rev out so I switched the setup to this. Current jetting is 158main ,50pilots,cel needle middle clip,a/f screw 1 1/2 out. Any suggestions??

I got a stock airbox with k&n filter/ also have another with a pro flow setup 65shipped with filter Also have a straight stock rear axe 90shipped, I will get u pics tomoro

Kinda makin me wana do my bike candy blue,orange,chrome looking at these plastics. Really thinking about it!!

Bump

Bump 450shipped!

Ok got the 39mm carbs and intakes on and it feels much better, just gota Play with jetting. I put a 162 in and it feels rich past half throttle. I'm Guna drop to a 160-158 main ans see how it feels.

Do u want cylinders that are ready to run or just fucked up cylinders for mockup?? I have a few set of cylinders that need bore/hone w no pistons. Pm me If interested