tz racin

Last price reduction 900 for roller with sway bar and flattrack rims tires,700 for topend 400 for 10 mil crank

Thanks bud payment sent on grill

Ok i got yur pm with price need a pay pal adress now thanks mike

Need chrome grill price plz thanks

How much for the chrome grill? And also paypal to pay ya thank you mike

Lol wow!!!gotta love banshee hq

Really ridgid gives u more traction on a hard dirt pack dirt starting line ??? Anybody ive seen blows the rear tires off with a strut on hardpack dirt but when we go to really soft loamy loose dirt tracks and sand then we have seen struts shine well for traction, but every track is different i guess!!

U want the rear of bike to be lower than front when sittn on it,and have 2 INCH OF TRAVEL OR LESS U MAY NEED A LIMITER STRAP TO hoLD THE rear of BIKE down a inch or 2 lower in rearwhen u sit on it but still have like 2 inches of travel when yir on it. We uae arock l/w blaster axles on ours a ton lighter and narrowed oved stock banshee axle by 2 pluis inches on each side

Ps if u have a strut in there for dirt drags get it ouuta there and get a shock in there and try different settings and spring rates before u go changing to a costly swinger change,hope it helps bud mike

Are u running a shock? Strut? What kinda tires? Screws/ chissels? Go to a softer shock with a quicker transfer rate or softer rear spring dirt u only need 2 inches of rear shock travel when yur sittin on bike compession on on softest setting, and rebound dampening on the slowest rebound setting i run a 10 inch swinger on a 95 hp alky 4 mil motor with xcr 20 inch holeshots with chissels and screw mix and i never unload rear tires,bites hard

Wow 2 posts almost alike, ths phone is smoked sorry guys

Okay guys just got done talkin to my buddy 1000 for rollin chassis with all the flat track rims/tires with sway bar wants450 for 10 mil crank and 775 for t rex top end no carbs or pipes 900 with the 38 lectrons i told him he needs to become a memner on here so he can sell his own stuff lol but in my shop and it must go need room for sleds lol!! Thanks for the help

Okay fuys just talked to my buddy that owns this tt qaud 1000 firm on rollin chassis withe the flatrack rims and tires rhat came on it he wants to keep the trans and exstended cover loc out and billet basket for his future drag project so 10 mil crank up for grabs 450 and t rex topend for 775 no carbs or pipes thanks guys mike

I believe he wants 1500 for roller with all the flatrack tires rims sway bar dont have a ahort swinger for it just the long one i can double check on roller price i believe shocks in front have titanium parts in them as well i dont know much bout the chassis at all ill have to check oit more with my buddy thanks for helpin out!!!!!

Thanks bud i appriciate postin the pics! Will seperate motpr and roller!!!!

Hold on fellas pics coming by this evening been busy as hell at shop ill git ya some pics to post tonite thanks guys mike

Interested in axle?$$$$$$$$$ thanks

Lol yeah i got it straightened out and 2 g later lol!!!!!!now its trustworthy was thinkin bout partin out flatrack chassis and motor or split up,, the chassis is fully adjustable all light chromoly tube frame any offers i ll run it by my bud, i do have stock 10 mil cylinders they that lrd did that are not yet ported,i believe they are like 72 or 73 mm bore size with fresh cylinders lile to hang on to em till bike or motor sells

And by the way time for new droid all this phone does is mispell everything lol!!!!!!!

Yeah it is,,the guy that sold it to me is a solid no good liar it got a new complete clutch set up completly new igntion system from stator to coil including a harness had no squish clearance a beat transmission etc it all has beeb replacing with solid parts now made over a 100 hp on dyno with shear pipe came with some homade half ass mickey mouse made pipes etc any how its all xorrwcted now could use a couple holes helie coiled that hold side covers on but doesnt affect anything.also has 38 mm lectron carbs on it now instead of his kehiens with a unsafe rigged up throttle cable dont have a short swinger for it just plus 9 on it want 3000 grand ready to go tt race or drag i wont the 10 mil lrd cylinders till bike sells. 3g low as i can go guys as im sellin for my customer that got takin advantage of when he traded his nice 06 iqr race sled and put up cash also to get tgis bike ita now a trustworthy motor now . Buy wasnt even close b4 when he got it!! Thanks

Good to hear, glad u guys like the parts enjoy! Mike@Team ziehm motorsports

I cant upload pics text me for sum my mobile uploads r disabled and can not get it to work sorry guys thanks

Sellin this for a buddy of mine have a custom fully adjustable custom chromoly 250r style flat track bike has a 10 mil trex in it will seperate as a roller or complete with 10 mil trex just freshened 3200 kick n go. Located in western ny may possibly trade for a 4 mil or 7 mil banshee for my buddies little brother or a stock stroke cub lemme know what u have bike has a sway bar also comes with flat track rims and tires has plus 8 swinger on it for a couple gras drags we did, last month can be shortened to - 2 if ya wanted ,text 7169906215

We seem to b beat on these pipes guys ive been askin for a while now and nothing was gonna sell em a drag tank had it all boxed and ready to go and he disapeared on me for a week so i sold tank to dannie instead ,hope someone gets the pipes cuz i had no luck!!! Hes not a bad guy, prolly a little unsure of his build i guess!

Hey guys im lookin for a set of banshee front spindle mount front rims / tires. Lookin for 10x 2 with a pretty short tire need price and pics have a tons of parts to either trade ir partial trade?? Or cash plz send pics to 7169906215 thanks fellas