do-work-son

I have ordered a handfuls of parts from them an they have always been great an fast shipping .. There has to be more to this story .. Ain't Chariot performance a member on here ?

This is the ones I used from cascade 8 short then 2 long... I screwed em in with some vasoline and torqued the head down to 20lbs last night just worried about it don't wanna have problem would rather tear it back apart now and do it right

They don't bottom out

What do you guys use when installing new stud in a cub block ? Heard vasoline or red locktight ..

Good guy ..said he would buy had the money to me in thru PayPal less than a min.. no bullshit with him thanks

YouTube got a few video of people removing them

Looking for all the screw that hold a grill in place ..

I figured this out..thought I would share for any one else that might have this .. Some one has drilled out my slide to drop the needle down and lean it out .. Along with this they put small washers on the main jet to drop them down as well ..

Should there be play up and down on the needle .. About 1/8th inch .. I am switching to a set of airstrykers and while I had them apart and switched the needle out I noticed play up and down that the regular pwk don't have .. Some one had a little pieces of red rubber between the needle and where the cable hooks to take up the play is that suppose to be in there ?

I have the eBay one its just girls not the devil and angle but over the summer ran into few other guy that had the same one as me and for the new bike thought I'd see about a grill no one else has

With the center bar splitting them ..

The no fear girl ..

Any one know where to get a custom grill made ? I tried JD he won't be able to do it

$25 plus shipping and fees or gift it

Have ya got this dialed in yet ? I got 35s for mine and I'm hoping I don't run into not have enough carb for the motor.

Ill take the plus 2 if he don't ! Pm me Paypal

Just met up with BigRed and got his 472 super cub he drove over 16 hour in a day an a half from Wyoming to meet me in Washington so I could buy this thing .. Great guy hung out for little have breakfast and he turned around headed home.. Big thanks to his G/F as well for making the trip! I gotta get a set of domes and gas carbs on it and wait for little warmer weather go play with it

You got your choke tube in and your slides in the correct carbs ?

IMO If ya get the k&n make sure to use outer wears with them I have knock off k&n from herr jugs with the outer wear and never gets and in there I put a little grease on the inside of filter and there never sand stuck in it .. But seen guys run older k&n filter and ruin cyl in a weekend not using outer wears

Brand new all four just bought them and not going to use them open one package but the other three have not even been open $60 plus the ride

I got set of good arms and brand new bushing still in the package ill do 100 for them and save ya on shipping with cope j arms heal guards no caps or bolts though

http://bansheehq.com/forums/index.php?showtopic=156275&view=&hl=&fromsearch=1 Is this that motor?

At what point should you yet considering upgrading the stock bearing and or gears?

Looks like a beaver got in there went to town ! Is that in that blue bike ?