grizzly204

OK, so I found out what the problem was. Apparently the previously owner installed the carb slides backwards. Idles great now. Just need to fine tune the jetting.

Nobody can help me??? What a joke! I will look for help elsewhere.

I have checked for air leaks....none. Synched the carbs....done. Cleaned the carbs. Replaced the pilot jet with a 30 and it still won't idle and is boggy just off idle. If i recall the main jet is a 200. From what I have read on here the pilot jet would have been the culprit. Can somebody maybe give me some other ideas of what to check.

Well, I would like to say I am new to the forum and new to the world of the Banshee. I picked one up a few days ago and it runs great on the mid to top end but it won't idle. When you first start it up it idles fine(no choke) for 20 seconds or so and then dies. Once warmed up it won't idle and seems boggy on the bottom end. It does not have instant throttle response when revving it up. The mods--T-5's. TORS elim. kit, boost bottle, and pro flo intake. The head was supposed to have been shaved for higher compression but with the stock bore. I have no idea where to start other than cleaning the carbs(which I have not done). I live in Missouri so there is no crazy elevation. Some help from the experts would be great. Oh yeah, running Klotz. Thanks--Grizz