villthepill

ok heres some more pics. the wheel hubs were threaded. havent been workin on it past few days but there are no axle nuts on the axle. ive been tryin to knock the sprocket off but i cant see any evidence of splines or threads but it isnt budging. gunna try on the brake hub side today see if that will pop off. http://desmond.imageshack.us/Himg221/scaled.php?server=221&filename=img0190le.jpg&res=landing http://desmond.imageshack.us/Himg815/scaled.php?server=815&filename=img0191vvc.jpg&res=landing http://desmond.imageshack.us/Himg819/scaled.php?server=819&filename=img0192qdi.jpg&res=landing

ok i bought this banshee and the guy told me it had a one off titanium axle he had machined. so im digging into it trying to get the axle off and i notice that the wheel hubs are threaded on not splined like all the other banshees. has any1 seen this style before?? there a real pain to get off too. http://desmond.imageshack.us/Himg254/scaled.php?server=254&filename=img0189aa.jpg&res=landing http://desmond.imageshack.us/Himg406/scaled.php?server=406&filename=img0188gk.jpg&res=landing

i opened em up they were about 4 mm off, once i get my throttle cable ill see if its better. hoping that was the problem.

ok was playing around with my banshee today syncing the carbs and what not. When i was reving it up and letting off fuel was spraying outta the carb vent hoses (top vent lines not the overflow) on one carb. It was leaking as it was coming down from a rev. Not sure if it is float related or needle seat related, carbs are mikuni tmx 35s flat slide's. Any help would be great.