mainesupashee86

im pretty sure my carbs r on the right way the choke plunger in on the left carb and i removed the air filter r both slides are in and workin right for motor mods ive got it bored 2mm over to a 66mm wisco pro lite pistons a port and polish toomy t5s a pro design cool head with 22cc domes boysen pro series reeds stage3 dyno jet kit moose boot bottle moose tors eliminators (carb caps) a dyna teck cdi box i run a k&n filter and precharger no lid it idled fine before the bore and port and polish?

im between 100 & 300 ft above sea level

my shee runs fine just wont idle or start unless i crack the gas a little ive got my idle screws in all the way my main is a 320 a stage 3 dyno jet needle set midway my pilot is stock from dealer when it is runnin unburnt fuel pisses out my pipes im located in central maine