[plug chop result]

Just rebuilt it. It might have 7 hours on it if that

[stuck in 3rd and 4th..]

Plz help on topic stuck in 3rd and 4th gear plz

 

This happened to me one time I pulled the clutch cover off and the shift shaft had Messed up it was a really easy fix hopefully that's what is going on with yours too

[plug chop result]

The choke not closing all the way. Bad reeds. Not useing the choke properly. Carb sync.

 

The choke im not sure of but the reeds are two weeks old v force4s

Possibly a carb sync but it runs good on top end idk if it would make a difference or not.

[plug chop result]

320 sounds rich. i was at 290 with pods on my old setup but i didnt have any portwork.

 

Well I have a 300 I can put in and try should I order a bigger pilot jet considering it's hard to start what else would cause it to be hard to start

[plug chop result]

So i guess im rich? Anyone else got an opinion

[plug chop result]

Yes stock stroke and the air screws are 2 and a 1/2 turns out

[plug chop result]

Is it normal for it to have that spot on one side of the plug like in the first pics that i posted up

Its really hard to start sometimes until its warmed up then it fires right up

My setup is

Toomey t5s

Stock carbs 320 main 27.5 pilot

Uni air filter no lid on the air box and the box its self is drilled and cut its just there to keep dirt down

Cool head 20 cc domes

Stock cylinders with F.a.s.t clean up port

V force 4s

Boost bottle

+4 timing

I think thats every thing

And my elavation is about 900 to 1000

[plug chop result]

Take pics of the other side of the plugs too. ( flip em over)

 

I took pictures of the other side any help is greatly appreciated

 

 

[plug chop result]

Take pics of the other side of the plugs too. ( flip em over)

 

Well i didnt think to do that and i already left the farm but the other side has a brown ring around it just like you can see on the edge of the plugs i will takes pics tommorow

[plug chop result]

So i did a plug chop today and i have no experience with this at all so i was hoping some of yall could tell me what my motor is trying to tell me

 

 

[Josh Z]

very fast shipping and fair pricing I would definitely do business with Josh again

[intakes, clutch hubs, carbon fiber reeds, 8 pdl Extremes reed spacers updated daily. I have lots of parts!]

Great guy to deal with thanks for getting that coolhead to me so quick