qhall28

Price reduced to $4000. Plus shipping

The fuel pump hooks up on the side of the intake. And no the carbs are not for sale solo, they will be sold with the motor

yes i am also on planet sand but i bought this whole motor package from a guy off of planet sands he live s in Michigan. And i do not know the hp since i refreshed the top end. Thje guy i bought it from said that it made 148hp when he had it.

I have a 10mm DM engine including the shear big bore pipes and kehin 41mm alky carbs and a dyna tech cdi box. This engine was build by Dan at A&S, I recently had a new case installed, new 1-5 tranny, new pistons and rings installed. This motor also has a 10 plate clutch cover. Since having the work done to the motor i have never ran the motor. This engine has a lot more goodies that i have not listed.. But if interested please give me a call at 912-253-8444. If you are planning to pick up the motor locally i will give you 30 gallons of alky free

Reducing price to $2000, at this price this is a steel.

i might have to. thanks

Whats up guys. Here is a Lone Star Chromy roller. The frame has marvin shaw front suspension, its extended 4inches out front, 10 inche chromy swing arm with adjustable rear strut, brand new 10X2 front custom wheels. Everything in pic comes with the frame except for the radiator, handle bar grips and thumb throttle. Everything on this frame is damn near new. If you have any other question feel free to give me a call at 912-253-8444, i am Q... Thanks for looking. Pick up only or i can met you if its a reasonable distance.

I am reducing price to $2200. Any offers, this is a very nice frame.

Its 4 inches over in the front and the rear swing arm is 10 inches over. It is also made of c-molly.

i am located in chattanooga tn but i am from southeast ga. never changed the number when i moved.

Whats up guys. Here is a Lone Star Chromy roller. Everything in pic comes with the frame except for the radiator, handle bar grips and thumb throttle. Everything on this frame is damn near new. If you have any other question feel free to give me a call at 912-253-8444, i am Q... Thanks for looking. Pick up only or i can met you if its a reasonable distance. IMG]http://i1126.photobucket.com/albums/l619/qdaddy28/100_1504.jpg[/img

For $2300 i would jump on it, especially if it run good and is clean

They are being sold with the frame.

$1500 for the frame and a new set of rear american racers

I will not be parting out the motor. I think that I will keep it before I do that.

Dan at a&s ported it, and yes I will sell only the motor for $5000

yep!! i would sell them for $5500

I have a newly rebuilt 10mm dm full drag ported engine with no expense spared. I also have a very nice all chromolly drag frame with the Jr Dragster wheels. The frame will need an axel with rear wheels, seat and stock radiator. The engine has the following goodies: -Newly rebult 10mm billet crank -New Pistons and rings -delt v force reeds 3 -billet intake -alky 41mm PWK carbs -10 plate clutch basket cover -straight cut gears -dyna teck ignition -shear big bore pipes -New 1-5 over ride tranny from WCR I am letting everything go for $6500!!! This motor has not been ran since the rebuild so its almost like new.

No one needs a good rolling chassie

Oh yes. a 10 mil would be right at home in that frame. I was planning on putting a 10mil Dm in that frame but i sold it on here awhile back. Getting out of the sport for awhile.

i never raced it. i bought it from Askin racing and he said that he had a 4mill cub in it that he raced on dirt.

I have here a very nice LSR Drag Frame thats +4 in the front complete roller, all chromoly. Here is a list of items that on the frame. Marvin Shaw front Shocks Chrome Chromoly +12 swing arm with wheely bar hookups Brand new never used Wicked 10X2 custom wheels (spindel mount) Barley used 20X10X10 american racers. JJ&A adjustable 40mm axel. Polished rear brakes pedal Wicked adjustable rear strut All you will need is radiator, chain, clutch lever and thumb throtle. This this is ready to go!! $2500 plus the ride. Thanks http://i1126.photobucket.com/albums/l619/qdaddy28/100_1504.jpg[/img]

Now that $hit is funny!!

Do anybody have any numbers with wampus cylinders or do you know if they are really comparable to the cubs.

I would like some pics of the drag axel.