1998BansheeLover

Hey guys, got a new project. just bought my uncles banshee with a spare motor, and wanting to build this bike nice...wider a arms, axle, but mainly want to mod the motor good, would be riding a good bit of trails but would be duning a lot! so would a dune port work ok? and could i run it on pump gas? any suggestions on the build? looking to get around 60hp..thanks!

I may be wrong but lemme know if i am. If i get wider a arms the bike will for sure be lower...but will +3 +1 a arms be too low, if i use a stock swing arm...or does the swing arm not effect it? or should i just go with +2 +1 a arms?

k guys need a throttle cable thatll fit a 98 banshee with tors...dont mind if its used but needs to be in good condition, trying to get it quick and cheap..pm me thanks

Did The Banshee Values Drop, cuz around my town and other places all the banshee have went from like 3k to 1700 and 1500, and they're pretty nice. Wats the deal?

ok so im a newb so havent ever sold anything one here....I Have a 1998 Banshee, It has stock ports, bored 50over, has some sort of aftermarket reeds, im thinking they're boyesen, with toomey t5 pipes, eveything else is stock, the a arm and swing arm are painted black, and the hubs are painted cherry red. wanting to sell to build up another project, it runs great! Needs some small stuff done, its not the the cleanest but need to sell..Dont Really Want to part it out, but if i get enough replies to part it out i will, Its located in Austin Texas, was asking 1700 but make me an offer..pm me for offer and questions, can send pics if interested, it wont let me upload them for some reason

So going to go ahead and rebuild my shee its My cylinder has been bored 50 over and looking to get a piston. I only need one with rings but if you have a whole kit with 2 thatdd be cool! Would like to keep it as cheap as possible. But pm me and let me know what u got?

not that i can find the outerwear had a small hole at the end but thats all

so we just got back from little sahara oklahoma, and when we got the there was like only 3 or 4 families there raced some 450rs and yfz doing pretty good until on one of my races, my banshee bogged down, and the left cylinder wouldnt even run, there was sand all in my cylinder, i was running a K&N with an outerwear guess it didnt work too well.. thought my crank seal had come out. we got home friday so i tore it apart sat and and somehow a pice had chipped off my piston and got stuck under the reed, causing it to run bad...time for a rebuild, held together for a year almost to the day..

hey guy looking for a gas tank cover for my banshee, doesnt matter wat color, i dont mind scrathes as long as its not more of a gash but PM me a price and pic. Thanks

ok guys just thought I'd let you guys know theres going to be a drag race competition in Koerth Texas, On March 27th so far that ive heard there is going to be over 20 there, Everyone Welcome Bring your quads and stuff its going to be black dirt tho so idk if you want to run your paddle tires but im not for sure, John Frazer is getting the competition together he founded Frazer's Cystic Fibrosis Benefit to help people with Cystic Fibrosis he host tractor pulls and cook offs, his number is (361) 293-1818 he'd be happy to give you directions and info so give him a call.

so pulled my banshee out of storage and went riding and eventually it got dark, and i turned the headlights on and they would work so i made sure everthing was plugged up and still wont work, before i put it in storage when i switched it on high only one would work but on low they both would, do i need new lights?

prolly a dumb question....so my cousin just bought a 07 trx 450 and had an hrc kit put on it, and i raced him on the road but my left front wheel is bent so it started wobbling real bad when we got going fast so im going to see him at little sahara and was wondering if i might have a chance, hell be running itp sand stars, i can beatjust abt any stock 450, and ive read tht the 450rs with an hrc are prety bad and i cant find a forum that has the answer my mods toomey t5s bored to a 362 k&n filter Boyesen reeds ams arepspeed paddle tires thanks for the answers in advance

Was going to buy a motor but tings fell through, so im looking again, its for my 87 duner/drag banshee, would prefer a long rod, or 4mill, pm me if you got one and we'll talk thanks

thanks guys! ill try it

ok went to oreilly and saw that duplicolor there but they made it in ford, gm and chrysler colors, is there a big difference..

so i decide on redoing one of my shees(painting and such) and the idiot who i bought the shee from stripped the bolt or threads, and i cant get the gas tank off, plus the front plastics that bolt onto the gas tank are stripped to, any advice guys?

ok thanks guys!

Hey does anyone know the color code to the stock silver that comes on banshees?

Looking to buy motor mounts, and all bolts to mount my motor, also looking for some axle nuts, shoot me a pm, thanks

Hey I was wondering what paint band yall would use for plastics, or does it matter? iM GOING FOR THAT FLAT BLACK thanks

Looking to buy small accesories, such as, motor mounts, bolts included, and like bolt for plastics, axle nuts, handle bar clamps, i bought a rolling chassis and its missing a lot of bolts, so im need a lot, pm with wat you have, pictures would be good thanks!

I Have A 1997 Cr 125 im needing to sell to fix up my banshee, just had a new topend put on it, doesnt even have 1 tank of gas through it. It Runs Great! Would Be a Great Beginner Bike For Kids, Just Make Me A Reasonable Offer On it I really need to sell it,Its Located In Austin Texas, Local Pickup, Would Consider Trading For Banshee Parts,(Plastics,seat, motor or watever) Pm Me for pics

Found This On Craigslist, That Wat I call Nice!!!!! http://oklahomacity.craigslist.org/mcy/2084169988.html

hey guys, i was wondering if can i run a 115 long rod with cheetah cubs?...or not?...and also i have another banshee im thinking of running a 4mil crank in wats a good brand to run?

Looking to buy a complete stock banshee motor thats runs,doesnt really matter if it bored.. if you have the wiring and everything like the carbs and reeds and stuff like that to make it run thatd be great!. But if you dont thats fine too!. If you have one send me a PM..thanks!!!