Borrink Performance

Thanks pete, ill see you friday at 3, hope you dont have a jelious wife, jessica is coming for pics, see you at 3! tom, this forum is going to get alot of views, mark my words!!!!!!!!!!!

Both phones and accesories, for a set of brand new R-2 pipes in either bare or hi-temp black, we split shipping. thanks, i wana get a phone for my little sister, appreciate it, tom 616 262 8808 theres posts of my pipes on images and for sale.

Still in the works, going to fit a set this weekend, but testing might take some time, there is some serious competition here and im not out to be 2nd. Thanks Tom

just wondering, i have some pipes, maybey you might be interested in, possibly work out a deal. my sister is looking for that same phone.

Sweet, hope they were easy to install. looking forward to your ride review!

Here is a pipe review, This one is from Yaxy, (some of you know him im sure) He tested my pipes when they first were in the design process, the pipes he tested were sent to loco (owner of bansheehq) and he tested them and posted on this thread as well, hope you like!! Thanks Tom Pipe Ride Report Conditions: Partially cloudy 45-50 degrees Elevation: Approximately 800 ft above sea level Terrain: Sandy/Dirt and grass mixture, gravel road MX track moguls and open areas Quad: 89 Banshee with following mods -MX Port -Pro Design Cool Head (21 cc domes on gas) -V-Force 2 reeds -28 FS Mikuni carbs -Tom’s Pipes Comments: All testing was done with no jetting work. Quad is currently jetted for FMF Gold Series Pipes as follows: (20 Pilot, 3rd clip on stock 28 fs needle and 280 main) Bike ran exceptional well and only jetting that may have been required would be the main jet. Idle: Pipes had no effect on idle speed. Throttle response was instantaneous and was immediately in the revs when applying even the smallest amount of throttle. Low end: Once the clutch was disengaged the quad wants to lunge forward. Power was there instantaneously and has exceptional torque while never entering the power band. Compared to the FMF’s the quad came on earlier and harder with the new pipes. A quick blurp of the throttle off a slow idle speed resulted in instant front end loft, which was difficult to do with the FMF’s from low RPM’s. Mid Range: Like the FMF’s the bike could be lugged in a higher gear and did not need to be downshifted to accelerate at a good pace. Even in the lug mode once throttle was replied powerband cam on really quick. Once RPM’s were at the fine line of the powerband engagement, instant throttle resulted in an extremely hard hit that resulted in heavy wheel spin. Much harder then the FMF’s. As a result, instant shifting is required unless you run very aggressive tires. The pipes like rapid shifting and encourage it. Once shifting through the gears the power is always there and the front end wants to raise. Pipes accelerate very hard from a dead stop or rolling through the gears. Top end: (Gravel Road Test) Unfortunately, due to the fact that the quad was not jetted to the new pipes, wide open throttle was not achieved. However, hard straight line acceleration 1-6 gear was conducted and the bike never left powerband, (more gearing would have been nice), 14-41 is current. Summary: From bottom to top the pipes performance is incredible. From lugging through the gears to heavy throttle applications the pipes perform.

Talked with Dave, super guy, were gona put some pipes on his bike weekend after mothers day, little bit of testing and we will show you guys what we come up with!! Wanted to add that ive changed one aspect of the inframes im selling here. and that now theres o-rings at the main chamber exit and one at the start cap of the silencer, so you have a bit of adjustability with your stinger tube, some customers like to put hangers on the silencers, hope you guys like!

Im just getting the hang of loading pictures on here, Anyway heres more of yax banshee with R pipes

Ok, i sent you an email and its sounds like we have a deal, talk to ya soon. Tom 616 262-8808 Heres a few pics ive got back from a customer. He also wrote a pipe review but i havent gotten it yet. should be today somtime. Hope you guys like.

I live in Big Rapids MI and in need of a good looking banshee to fit my new out of frame pipes to, it will take me a few days to play with the design. in return youll get to keep the first set!! let me know, I would like to have a pic of your machine emailed to [email protected] i prefer a modded motor and front fenders cut. Thanks you guys please call with any questions 616 262 8808 Tom

John, I need a phone number for the shipping out of country! Give me a call as soon as you get this, i also sent an email to you. Thanks Tom 616 262 8808

not yet, ill post when i can.

Wow, been a long time!! I remember building your set, how they looking this many years later? good to see some of the same people here! Just gimme a call somtime we might be able to get you a deal on these! Thanks Tom 616 262-8808

These are drag pipes but inframe, There realy at there best on a mod motor, however they seem to realy work good on stock too, i sold a set last week and the guy had toomey t-5 and after his first ride he was ear to ear grins, I spent alot of time making sure these are gona be the best pipes for all types of riders and am satisfied they are. I have 3 sets ready as of today and will have more done by mid week, Thanks Tom

Yes, They Are a comparable pipe, I will be making out of frames real soon, Its been quite a process getting these to be what they are and finaly im happy with every aspect of them, The chrome is amazing, Hey thanks for your interest. Tom

R-2 pipes made by Tom Borrink. Show chrome- $600 Bare-$450 Hi-temp flat black with polished silencers $475 All prices include shipping. Out of frames will be available May 7th please call with any questions, 616-262-8808 Thanks Tom Borrink

Here's more pics, If you need them bigger I can post them individually.

here are the first set of R-2 pies in chrome, the chrome is flawless in every way, once i get them on a banshee or this set gets to its new owner there will be pics of them on a banshee.

havent gotten to that yet but ill see if i can make a few sets in the next couple weeks. ill be putting pics of the new chrome inframes on here tonite.

They should work very good on your set up, I emailed your tracking number to you earlier tonite. chrome is available friday and will post pics as soon as i pick them up.

Its good to be back, I am more picky than ever these days on quality, i am using a different chromer but am working directly with them to properly Buff, Nickle and chrome plate. They will be show chrome. and Hi-polished silencers.

Heres another set, chrome is gona be very nice, end of this next week ill be posting some pics, Thanks

What are your port timings? these pipes like a 200/134

i usualy use flat black paint. but i bought this glossy stuff and personaly i dont like to use it, it scratches to easily, id like to just send them bare steel, and let customers paint them themselves.

Very good, Thanks for your purchase, they be at your door in three days.