jd250r

I was kinda thinking that also but wasnt sure. Is there any good way to test for an air leak??

Im having issue getting my bike jetted with 28mm pwks and a chariot intake. I have Pro Circuit pipes, stock air box with pro-flow and k&n and the previous owner said the head had been milled. Im at 2800ft elevation. I had stock carbs before that ran perfect. I started with 155 mains and new plugs, way lean. You could feel it when it hit the powerband that it was starving for fuel. So i went 165 mains and other set of plugs. Runs great all the way through the power band until the top of each gear then goes flat. Did another plug check still lean. Im now at 170 mains and still am having the same result. Its starts right up and idles perfect and runs great on the low-end side. According to everyone else with similar mods in the "jetting sticky" above, 170 seems way big. I have clear fuel line so I can see the fuel flow. Sitting at stop and revving it, it keeps the lines full. Could I be running dry on fuel going through the gears or do I need to step up the mains even more?? Any help would be very helpful!

Ive bought alot of stuff from Boise. An absolute great guy to deal with!!!

Sent PM

PM Sent

PM sent

Intersted in a kicker, pipe hangers and intakes. Whats size of carbs are the intakes for? PM me some prices! Thanks!

Looking for a Billet Intake with built-in crossover for 28mm carbs

Pm sent on stem, handle bars, carbs and paddles.

My buddy has a bunch of 250r parts. His name is Matt. Here is his cell, 785-577-3588. Call or text, he answers both. Tell him you got his number from Jesse.

PM sent

Looking for a nice Quad Tech seat cover for a Banshee. Let me know if you have one! Thanks!

Still have the airbox? If so, pm the best price you can do shipped to 67846, business address. Thanks.

Pm me the best price you can do shipped to 67846, business address. Also send me a pic if you can, [email protected] or i can pm you my cell number.

Pm sent

Looking for an uncut airbox. Please send me a price shipped to 67846. Thanks Jesse

Looking for +2+1 or +3+1 A-arms, long or standard travel, perfer chrome but any color if the deals right. Also looking for a +4 axle. Looking for either Ohlins, Custom Axis, TCS, or PEP shocks also. Long or standard travel. Email me at [email protected] as I dont get on here much.

Looking for a set of +2+1 a-arms, perfer chrome but will consider any color. Also looking for front shocks; Ohlins, Pep, Axis or Elka's. Looking for a +4 rear axle, anti-vibe steering stem in chrome and a steering stabilizer. Please let me know what you have with a price and pics if possible. Thanks!

Hey guys. Went to start my Banshee up today to get it ready for the dunes next weekend. Started up just fine, idled for a bit then popped really loud. I then noticed the right exhaust stopped smoking and started running rough. If I put my hand over the end of the exhaust it feels like its trying to pull a vaccum on that side and every now and then it will pop and blow out exhaust then back to trying to pull a vaccum. Would a broken reed cause this or should I look into the engine? Thanks for your help. Jesse

My left carb started to leak fuel from the over-flow port. Leaks while its running. Is it ok to ride it like this? Leaving for the dunes in 2 days.

Sweet man Thanks!

Where does the rubber vaccum line that comes from the clutch cover go to? Bought the bike missing a bounch of hoses of the carbs and this line was just laying on the cases. Is it ok to leave here or does it need to be hooked up to something?

Looking for an extended axle for a banshee and yfz450 front shocks or aftermarket banshee shocks.

Interested in the Ohlins. Please send me some pics. [email protected]