Paco44

Was wondering if anyone could give me some advice on headlights, I'm interested in the PIAA 510 4in fog lights. Are there any mods. I will have to make in order to power these lights?

Yeah, stock stator i've been looking at trail tech or piaa extreme white light kit but they seem alittle pricey..

Was looking for some suggestions, I'm looking for a bright set of headlight for my banshee??

I had the quad rejetted a few years ago but I didnt do the work, do you know if the float needles and seats would be stock parts I could get in a carb rebuild kit? Or would they be different?

Was wondering if anyone could give me some pointers, my left carb is dripping fuel out of the drain hose at the float chamber. I took the carb apart cleaned the floats, float chamber, fuel valve and seat, main jet, pilot jet and sprayed out the rest of the carb with carb cleaner. I reassembled and put back, after running the quad a slow drip started again. Any help would be great.... Thanks.

i reused the ones for the lower control arms, but the upper dont fit because there is no grease tube, so when i install them they dont cover anything.

anyone with wicked a arms, did you use the dust cover from the stock a arms when you replaced them?

i'm installing wicked a arms, just confused right now do i use the larger caps that were on the end of the stock a arms, or do i install with just the black caps that came with the wicked a arms? thanks

Was wondering if anyone could help me out, i'm rebuilding my 2003 banshee, was wondering if i can use pivot works bearings for the steering stem bearing and rear axle bearing? or do i need to find stock bearing because its still the stock carrier? thanks for the help.