nokturnal

...

brand new, never used. 22cc, 9*, big bore domes (paid 250 + shipping, with domes) $150 http://www.vitosperformance.com/atv_parts/product.php?productid=317&cat=182&page=1 Also have matching Vitos forged/coated pistons, with 2mm pin offset (for 110 rod 4mil crank), 9* crown. That can be purchased with the head or separately $120 (were purchased for $95 each). http://www.vitosperformance.com/atv_parts/product.php?productid=11446&cat=205&page=1

bump

pm sent

Sure, let me know. If it is still for sale it is yours. nokturnal (AT) bell.net

You will need a powervalve controller (~40 bucks on ebay), powervlave servomotor (~25-30 bucks on ebay, or R1 Exup servo (same))to turn the valves and an RZ harness (i can include one free). The banshee CDI may be able to be wired in, but an RZ unit would be better. I would actually recommend a Zeeltronic ignition, it is a programmable ignition (CDI which lets you set your own advance curve) and powervalve controller in one. It replaces both the YPVS controller and the CDI. Exhaust, you would just need a couple of flanges made up, RZ pipes use bolt on flanges that the pipes spring too... wish they had made them like banshee, it would have been way less hastle to mount pipes...

From a running street bike, 1988 model, ~25K km on it. I was told it is on low bore, and have dealt with the previous owner before with no issues. No blow-by. Complete engine with stator - 800 Shipping in canada will be ~80-100, shipping to US will be ~150, both via FedEx ground.

Pair of PWK28, brand new, never mounted or seen gas. - 300 highflow billet (anodized red) water pump impeller and prodesign waterpump cover , both new - 100

You can send me whatever you want over PM. This would be the way to keep uneeded posts out of a thread...

The vitos crank is 499 with plate from vitos before shipping (which you do not need with my pistons), stroker plates are 40, 499-40 is 459... so you actually save 30 buying from me. Where did you get your prices? I was sure I paid 800 for my athena... but i can see some are now 750 on ebay (tho some are 825 and 810). Thanks, price adjusted.

clutch sold

392cc athena banshee top-end kit (cylinder/head/pistons) complete bolt on, just re-jet - 775 Vitos stroker crank 4mil, 110 rod - 430 Vitos 68 mm pistons for stroker crank, forged, coated skirts, 2mm offset pin - 180 Vitos billet head, orings, domes for pistons above (pump gas) - 200 Vforce 3 reeds w/boots - 220 GYTR banshee clutch kit (springs, plates, fibres) - 120 Or can work out a package deal. Also could potentially work in an RZ bottom end for locals... ALL parts are brand new, never used. I planned on using the billet head, crank and pistons with the athena cylinders for a 421 beastie. This was all going on my RZ350 road bike, I really only have frequented this forum to research the big bore kits, so please excuse my low post count. I am a respected member of the RZ350 community, ebay ID onthepipe9000 Had a baby... liquidating parts and bikes. I also have many RZ350 parts, an RD350LC and a gixxer 1100 for sale. email nokturnal (AT) bell.net