koolbreeze

deecalcote@ymail.com - Email 310-466-8794 Damon or PM ME!!

I'm late but here are the pictures.. Like i said its got go but no show. And boy is it fast. Any tips on sprucing up the looks will be appreciated. Thanks again everyone who responded.

ok, will do sometime tomorrow .

Thanks EVERYBODY for your opinions, I went ahead and bought the cub its a very fast bike, not any show but its got a lot of go. The other bike was pretty but i don't know much about the Vito's stuff and everyone on here has nothing but good things to say about cub motors so i put my trust in this forum and 90% of its members thanks again guys and wish me luck..

Its A toss up between these too shee's the one with very little description, the guy told me it has a stroker crank, 35mm carbs, Vito's cylinder, and a head where the domes aren't interchangeable, t-5 's, 8 in swing both are the same price. What would you do? http://losangeles.craigslist.org/sgv/mcy/1595295342.html http://inlandempire.craigslist.org/mcy/1598148674.html Both run on race gas. Thanks for ANY input. I'm driving myself crazy trying to decide.

What are plug chops?

There studs that have been cut down to sit flush, with silicone around the tops. Thanks for the info.

Thanks for the info PM sent. What about the holes that are plugged up on the carbs where a boost bottle will usually sits?

I just bought this 96 shee off of craplist for $1900, the guy i bought it from said he was the second owner and he hadn't did any mods to it, he says the guy he bought it from did all the mods. The bike pulls pretty hard and seems to be pretty clean, I have a couple of question about the bike that i hope maybe someone out there can help me with. I will post pictures for illustration to my questions. 1. It has a CPI Racing head, but i looked on CPI's website and couldn't find any banshee heads there? Can anyone tell me what kind of head this is? Looks like a cool head that i've been seeing but hell i dont know? I also wanted to know why would they remove the breather tube that goes between the two carbs, and plug up the holes 2. I see on my throttle there is two wires cut what is or was that? 3. Can anyone give me a better idea on how to mount these lights. Thanks in advance for all your help!!