[Any tips on DIY chrome spraying?]

www.sprayonchrome.com

www.sprayonchromekit.com

[How to run drag bike without radiator?]

One thing to realize, if you bracket race and get to the final rounds, sometime you dont have much time between races. Even using a cool down system its hard to dissipate heat between back to back runs.

[2013 BansheeHQ Ride at Little Sahara, OK - September 18-22]

prolly be in late late on Thursday. can't get off work except Friday. staying through Monday though to get some good riding in since this will prolly be my last trip. moving to SD in dec.

South Dakota, wtf!!!

[2013 BansheeHQ Ride at Little Sahara, OK - September 18-22]

I'm not sitting on any fags lap. I'll throw something together and get with it. I still have the 10 mil cheetah sitting in the cabinet. And my atc 70.

[2013 BansheeHQ Ride at Little Sahara, OK - September 18-22]

We're bringing the 9 passenger Ranger crew. The plan is to have it full of other guy's wives.

I may need a ride. I just sold both of my drag bikes.

[2013 BansheeHQ Ride at Little Sahara, OK - September 18-22]

Hahahaha. How does Craig know Chris has a short pecker?!

It didn't get passed the back of Tyler's tongue.

[2013 BansheeHQ Ride at Little Sahara, OK - September 18-22]

Cam atv... so we can ride around on the sxs to replace the golf cart right?

That will be some stanky leg.

[2013 BansheeHQ Ride at Little Sahara, OK - September 18-22]

I can drink with the normal Canadian Mexicans...... So that puts me right in the front of most everyone at the ls ride.... maybe with the exception of my good buddy Rotax Raptor.

One thing is fo sho, I will be drinking some cold beers. Chris, my short peckered friend, I'll have plenty of beer to share with you.

[10 mm cub drag bike $7,000]

Thanks blazen. I'll call him and see what's up. Its no punk and a bunch of guy will vouch for the quality of it.

[2013 BansheeHQ Ride at Little Sahara, OK - September 18-22]

Trying to figure out where to stay. Where is the nearest hotel?

Trails Inn Suites & Motel

 

1175 Main StWaynoka, OK 73860Phone: 580-824-2461Fax: 580-824-0723

10 minutes from the dunes

[10 mm cub drag bike $7,000]

Last post before complete part out.

I'll take $6,000 the way it sits and will drive six hours from Kansas city to meet. I'm going to give it a couple days and then start taking it apart this weekend.

[2013 BansheeHQ Ride at Little Sahara, OK - September 18-22]

 

[quote name="lms1977" post="1515874" timestamp="1377354374

I need in on the fire jumping contest

Jumping contest???? You're in. You do something better than JD and you're the man.

 

Fiddy power ftw

 

Bucky ya better man up.. I dont want to have to drink all the rum like last time... well maybe that will be more fun

 

And ya better not go to bed when the sun goes down

[2013 BansheeHQ Ride at Little Sahara, OK - September 18-22]

I need in on the fire jumping contest

 

Fiddy power ftw

 

Bucky ya better man up.. I dont want to have to drink all the rum like last time... well maybe that will be more fun

 

And ya better not go to bed when the sun goes down

[10 mm cub drag bike $7,000]

If I get time this weekend I'm going to start tearing it down to part out.

I have another 4 mil super cub drag bike I'll be doing the same with.

[wtb padla brats]

I'm pretty sure I have a set but not sure how many paddle they are. I'll look and let you know.

[10 mm cub drag bike $7,000]

Yamaha Drag Banshee.

96 inch Brooks chassis

10 mm 68 mm bore cub motor built by Nate McCoy

Full spring loaded Hinsen lockup clutch

39 mm alcohol carbs with fuel pump

Bearing suport stator cover

Shearer drag pipes

N down 2 thru 5 over ride trans

JJ&A drag axle

14 paddle extreme tires

Wheelie bar included but not shown in pictures

Bike was ran last weekend at Midwest Sand Drags and ran 3.95 seconds at 78MPH in 300 feet

Motor was freshened up this spring with new pistons, crank bearings and seals It's 100% track ready with no pending issues at all.

[Safety at the track.]

What about JDS heel guards?

If I could get these to mount up to my round pegs that would be perfect. These are excellent protection to prevent what happened to Jonny.

 

[Safety at the track.]

Here's a picture of the foot pegs. They have a threaded hole in the end of both pegs.

[Sand Slingers Shootout @ MWSD's]

How far is it for ya?

Its 300 miles and I'm leaving when I get off work at 7am.

[Plus ten chrome swinger, spindle mounts and tires. More]

Are the spindle mounts 5/8s or banshee spindle.

[Sand Slingers Shootout @ MWSD's]

I'm in. Leaving Thursday morning.

[king of the pack ? hq ride 2013?]

I'm shitting in Tyler's cabin.

[2013 BansheeHQ Ride at Little Sahara, OK - September 18-22]

Alright, according to the old trustworthy farmer almanac, the high is going to be in the mid to upper 80s and the lows in the mid 60s. So no more heat excuses.

[2013 BansheeHQ Ride at Little Sahara, OK - September 18-22]

Its going to be hot hot hot in September. Get ready for it.

We'll still be there though.

It can be 105* the hole time and I wont give a shit. I would rather that than rain and snow. Cold beer, a/c and good friends.

[Who had the maroon hill shooter 4S]

Who ever it was had a rigid and the hill shooter. Just chassis.