-
Posts
427 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by amstall
-
-
From my experience the straight paddles are a little harder to get started going sideways, but once you get them going they snap right out there. Plus they do give you a lot better push on the straight runs. I liked the haulers that I borrowed for a couple trips over my sand stars, that'll be my next set of paddles.
-
Nice looking bike man. You'll learn more on this forum than you ever thought there was to know about banshees. It's a great site. Congrats on the buy.
-
x2. Just search ebay for ventureshild or scotchgard film, they're got a bunch of different shapes and sizes.
-
Crated NOS 1986 Honda ATC 250R (*Complete PARTS ONLY) Vintage OEM Hondaline
-
i dunno if i can make it before winter or not but i'm definitely down. i'm always up to check out new parks
-
16' long should be plenty. We've put 4 quads on a 16' car trailer several times. Enclosed should work too, as long as you're wide enough u can get them turned sideways. All of our quads are wider than stock, it's tight but they fit. I'd recommend longer than you need though, so 18' or 20.....leaves room for camping gear and firewood.
-
my 2 'shees are sitting here waiting on ya. lol
-
Here is a list of what the extra bike comes with:
Frame
-Vin JY43GG0385C059247 (yr 2005)
-Broke and rewelded grab bar mounts
-1 Rear Fender Mount missing
-Heal Cup mount missing
-Rear Shock mount has been rewelded
-Chain roller included
Motor
The crank is siezed but the output shaft spings freely. The lower case half is cracked on the clutch side, and the upper on the stator side( dry area, doesn't effect anything). The cylinders have been bored once (20 over) Clutch side cover is missing. The cylinders alone are worth almost $100 on bansheehq.com
-1 Good head
-1 Head damaged dome one 1 side
FMF Fattys
-Surface rust
-No dents or dings
-would be perfect if powder coated
2 Complete clutches
-basket
-inner basket
-pressure plate
-disks
Swing Arm
-Needs rewelded
A-Arms
-1 upper bent
-ball joints appear to be good
Front spindles
Front Rotors
Tie Rods (not bent)
Front shocks (condition unknown)
Rear Shock (told it was blown, never used personally)
2 TORS Kits
Stock Headlights
Kicker
2 Rear Sprockets
-1 good
Sprocket Hub
Front Sprocket
Chain (condition unknown)
Rear Rotor and Hub
Pivot Bolt
Chain Tensioner
Bearing Carrier
Axle Nuts
All Radiator Hoses
Coolant Bottle
Shift Lever
rear Brake Lever
Lower Front fender mounts
Pegs & Heal Cups
Rear Brake light switch
headlight/run switch cluster
Thumb Throttle
Coil and Plug Wires
2 front calipers w/ pads
front brake lever
front stock bent steel brake lines
Front Brake T- and Hose
Rear master cylinder, Caliper, Resivoir, and pads
Stator Cover
-Cracked
2 Stock Carbs (1 L, 1 R)
Oil filter cover
Kick Gear
2 boost bottles
2 reed cages w/ reeds
2 intake boots
-1 cracked
radiator
Air box w/ 1 into 2 boot
Gas tank w/ petcock
asking $1000, make an offer. Message me with questions
-
All depends on your elevation and the compression you're making. I'm running 21cc domes w/ +4 on the timing plate on 91 octane fuel. I'm about 1200 ft above sea level.
-
it's not that big of a deal. just drain and replace your oil and run with it. if you're real worried about it change your oil run it a bit, change it again then it'll be good for sure.
-
did I miss the date??? or when is it. Might be able to wrangle up 8 or 10 guys from KC to head out.
-
are the cushions even servicable? i know i need new ones but hate to drop the cash in a basket if i dont need to
-
Anybody?
-
Pm me with pics and a price
-
I need to know how long the stock silencers are from the front of the pipe to the rear mount. Might be interested in buying a set too if the price is right
-
Too bad it's not next weekend so we coulda brought out our 3 'shees.
-
40:1 works great if you get the 32oz jugs. Use half in 2 5 gallon cans, then throw it away. It's pretty great.
-
We always stop at the super wal-mart in Alva or Enid, that way you don't have to worry about stuff staying cold so long. You can get pizza at both gas stations and the pizza place. There's an old school soda fountain/t-shirt shop in town. There's also a burger place in town, a burger shack at both campgrounds, and millers (breakfast and lunch buffet) but I've never been to any of them. There's a small grocery store in town but they don't have much.
How much are the reserved sites?
-
i'm sure andrew3160 and i will be there.
-
Like it says, anybody that has one (like the one below) please chime in. I'd appreciate the info.
-
FMF's aren't bad at all for a stock bike, when you start getting more motor...then you can look into something else. I'm happy with both sets of mine though
-
The state owned spots are all first come first serve. Little Sahara Sand Sports has reservations online http://www.lspsonline.com/cgi-bin/campsite_select.cgi.
Deuces Wild does too, but you have to call or email them.
To make a reservation, contact us by phone or email:
Phone: (580)824-0085
Phone:(913)972-2209
Phone:(913)972-2201
deuceswildcampground@live.com
-
I have a Regina X-Ring. No good pics of it, but it looks pretty decent.
btw. those shades were made by Oakley several years ago. I have no idea what they're called but I know I saw them in a Oakley store in Chicago or DC or somewhere when I was in highschool
-
new pipes will help with your power for sure. if you're wanting to ride in any sort of mud or water you best leave your airbox on. I always run 91 (the highest we can get here) in my shee, a lot of guys mix 50:1 just be sure your're using a good oil (AMS Oil, Klotz, etc). I personally mix 40:1 just because it works out perfect 1 bottle to 10 gallons...its more or less a personal preference thing though.
good luck with her though, 'shee's a good looking quad. O, and welcome to BHQ.
differences between cylinders
in Banshee Repairs and Mods
Posted
Yep. Try syncing the carbs, takes 10 mins and its really easy....this'll help