scav8er

Well started to pull everything apart tonight and I found the problem. I took the stator cover off and the flywheel nut fell out! Put it back on with locktight! Started right up and no rattle! Oh well live and learn at least it was something cheap this time

Ok so i tore into my bottom end for the first time. Put everything back together rode down the street twice and everything ran great now when i kick the kick starter i hear metal to metal clicking or clanking in the bottom end. Any ideas?

I'll check again when I get home but if I remember correctly they did line up.

I just picked up a 96 Banshee for a trail quad while I build my drag Shee. The clutch works fine I can push the quad with the clutch pulled in and it in gear. Only about the first 1/4 inch of pull does anything? In other words when letting the clutch out nothing happens until I get to within a 1/4 inch of it being all the way out. Is this an adjustment I need to make or do I have clutch problems? I just got it and im out of town so I havnt got to tear into it yet. Any ideas?