N2DEEP

http://i1270.photobucket.com/albums/jj608/n2deepRacing/photobucket-45764-1348887336841.jpg

Chrome one out each side 200+ shipping and fees! Firm this is giving them away! Working on pics if want them right away text me at 6015438371.

You are very correct but what I have been telling everyone is passion racing set the motor up new and he is the one of the builders that use wsm. Everything should have been correct! Only thing we could find that could have caused it is how wide he ported the exhaust and caused a little piston slap. The wsm could not hold up to it.

I see your ex ports we're takin out to much. Lol I would just buy new cylinders!

I did not like the way it ran with the lower port timing at all.

Oh and this was in a 10mm cub plating was fine! The wiseco pistons are still running in this motor today! Ask BigRed350x how its doing!

Must have been builder mistake then! Passion set it up and I made maybe 10 passes other motor and it took a shit! You guys can do what you want I am telling you what happen to me and it sucked! I have never not once had a problem with wiseco pistons!

Lol they do not make more power! Call Titan racing he will give you all the true info you need! He has built more winning motors than all the builders that use wsm pistons put together!

The intake bridge of the piston broke out and came out under my intake! I am not going to get into this shit fest with these guys around here but I will 100% not using them again! This was a 10mm cub ported and set up by passion racing. After it took a shit it went to Tim at Titan racing and he set it up with wiseco blaster pistons and cut some domes.... BigRed350x can tell you the rest of the story! Still running strong!

Yes it will change port timing! I had very bad luck with wsm! Titan redone the motor and wow was it like night and day difference. If it were me I would stay away from wsm! I had the same experience with wsm pistons as you did with the wang cranks!

Man the racers edge pipes are imo the best pipe you can run on a cub! I will gladly buy them back if he dose want to sell the I will buy them! I ran the timing at 8 on this motor I think by the way.

Yeah you bar has your rear tires breaking traction! Good pic though! How deep they cut the track?

You fuckers are killing the market! If people would stop giving the bikes away and stay firm on prices would go back up! Supply and demand would come back to the banshee market!

Need a slip on pipe on pipe for a 07 400ex

Pm me a price

I need some 44s set up for pump and on gas. Going on a snomo bike

Wow that's a smoking deal on the best kill switch made!!!

Well said green! When having these motors set up you need the complete setup they build these motors for like pipes and carbs. They all are different! These motors are power house motors but its can be hard to find the sweet spot with them! You need to have your builder behind you if its your first big motor!

How long and how much?

Would you sell the shocks only?

Pm paypal to me I want it

I can't get the pics to load what color is the throttle? I sure I want it just need to see it!

K&t uses flat tops just to let you know. And Jmo Titan racing is the only one I think could get more out of a motor than a&s! Ps: I have seen Tim from Titan make a k&t dm faster than it was lol. This motor won planet sand class two years strait after this. I will tell you this tunning is the biggest thing with these motors!

sold i want it

what would u want to trade for the trex set up send some pics to [email protected]