[Front Shocks:-After Market.]

Set up for 165-170lbs and 13.5 eye to eye, preferably single or dual rate spring. Must be in good condition esp the rods.

[Works shocks, Marvin hill shooter]

Rob, thanks for sending loads of close up pics. I think, I will rather wait and buy a new set as per my specs.

Cheers and All the best for sale.

[Works shocks, Marvin hill shooter]

Open for offer on works?

[Mikuni 29mm flat side]

Missing Idle screws?

[pwk 28s with throttle cable]

still for grabs?

[32mm Mikuni carbs & UPP manifolds]

Set of new can be bought for 250ish. 

[Pingel Valve.]

Thanks for help. Bought it.Thread should be closed.

[Pingel Valve.]

Still looking for one.

[2003 banshee part out]

We exchanged few emails, I think. PM on the way!

[2003 banshee part out]

I need Pingel valve. PM Sent.

[Pingel Valve.]

Up! Will settle for one without reserve as well.

[Pingel Valve.]

Trying my luck, hope I get one!!

[Pingel Valve.]

Thanks. I am looking for one with reserve.

http://pingelonline.com/powerflo_3211_race_step_2.htm

[Pingel Valve.]

Thanks! Picture and expected price will help.

[Pingel Valve.]

Need Pingel valve with dual outlet.

[More misc parts]

Pingel valve Sold?

[Parts Parts Parts and lots of them Cheap !]

Carbs still available?

[Mikuni 28mm flat slide carbs with throttle cable]

I am out.

[Mikuni 28mm flat slide carbs with throttle cable]

Ok. by Offers I meant cash(Lower than your quote, not sitting on much cash).

[Mikuni 28mm flat slide carbs with throttle cable]

Open to offers? What is the size of Slides?

[How does it looks?Pics of Clyinder head, Barrels and Piston]

Not sure what happened to the exhaust ports. you never know what people have done before you own something. You could try clean it up with a sanding wheel that fits on a dremel.

 

I have the same thing on mind, I hope it won't affect the performance anyways?I was thinking of leveling the area and later on get the area polished!

I'll get the re-bore to 1mm from a professional!

[How does it looks?Pics of Clyinder head, Barrels and Piston]

Is soda blasting good way to remove carbon and clean the combustion chamber?

[How does it looks?Pics of Clyinder head, Barrels and Piston]

Hello,

This post is in regard with RD350, I understand it's a Banshee dedicated forum, the reason I posted here is, this topic has been discussed in length here and I need suggestion about the problem I have.

Plz go through the pictures, Give you feedback as to how things look,

Barrels,Piston,Ports and Head Pics

Bike is standing idle since last 4.5yrs,There is layer of carbon down your transfers,does it means huge amounts of carbon and the exhaust is reversing flow and going down your transfers and probably all over crank case and crank?

What could be the reason for it and what is to be done to get it fixed.

 

There is some damage on roof of exhaust tunnel be cured and made good:-

Damaged Area of roof of Exhaust tunnel

I was cleaning the barrels today,when I realized that the everything is not normal on roof area of exhaust outlet, there are impression of screwdriver hammered to the roof.What needs to done about it?Does it looks bad or worst?

Can this be made right without porting?

 

Cheers!

Gill