[Hinson spring loaded basket 8plate complete with straight cut]

Hinson spring loaded basket 8plate complete with straight cut.everything still in excellent shape.

843-499-1012 text if you want it

$375

[talk live with all your sand racers]

Check out the 300ft and hill racing channel on Zello

http://zello.me/k/d4ugm

[Live drag racing talk]

Check out the banshee street kings channel on Zello

http://zello.me/k/bJ1rS

[clean up port vs full drag port]

I recommend anyone even THINKING about taking advice from this dude to look through his posts over the last few years. ..then decide.

 

Sent from a van down by the river

glad you think like that,its what keeps some ahead of others,just got to know what your doing

[TM 35MMFLAT SLIDE]

Almost new...gas carbs

 

$300 shipped

 

text 843-3030271

 

[hinson straight cuts and spring loaded basket]

sold 5hours after posting

[hinson straight cuts and spring loaded basket]

$375 shipped...has roller bearing in center

 

text me  843-303-0271

 

[clean up port vs full drag port]

another miss leading info is that alot of compression slows you down....{WRONG)....I SEEN enignes with 225psi run 116-120mph...(on alky).7/10milcubs... you just have to know what to set other things at....

 

when i port a cub i change the port timimg on the exhaust,but some (builders) just clean up the portand leave the timimg the same they tell you they drag ported it and charge you $450-500

 

had one tell me he never uses a degree wheel because they dont give accurate readings   

[clean up port vs full drag port]

dont waste your money if its a cub,builders will just feed you alot of bs,and in the end you will end up with a clean up port job anyway

 

lighter frame,pipes,domes,timing,and gearing will gave way more than leeting someone grind on your cylinder....theres storys i could tell you about BIG TIME engine builders whos ported cylinder and gave me domes to go with them and bikes was no faster than what i could do myself.

[renegade racing alcohol vs vp m1]

hummm guess not

[renegade racing alcohol vs vp m1]

is there a difference  between renegade alky and vp m1 ?

 

tried m5 but seems to lean the motor down to much,i want to switch to one of the above ones

[Billet tranny: meet shift forks]

i have smooth out forks like that and re install them with zero problems....now when you bend a fork then you have a real problem

[4MIL DM]

we'll keep...mods you can take down post

 

not going to gave away a good motor

[4MIL DM]

$3200 with out  stator and flywheel and one set of pipes

 

843-303-0271

[Any 1.1x 60 ft times out there?]

16 mil cheetah

 

pavment  

 

 

[4MIL DM]

pm sent back

[4MIL DM]

115

[4MIL DM]

$3580 shipped

 

best its going to get

 

and please dont waste time texting me about pictures or questions that has been answered here,if you dont really want to buy.

 

bottom line its a good motor with new crank,domes,piston,pipes,clutches and cases are welded NO epoxy.

[4MIL DM]

bump

[4MIL DM]

video of it running

 

[HOT BIG SPARK COIL]

$85 SHIPPED

[HOT BIG SPARK COIL]

TEXT IF  YOU  WANT IT

 

843-303-0271

 

 

[4MIL DM]

Fresh crank/clutch and domes.....comes with two sets of shearers pipes one BRANDNEW black the other is chrome its ready to run.

 

$3950 shipped for motor and pipes

don't know about porting,think its just a clean up

 

text ONLY IF serious 843-303-0271

 

 

brand new crank just installed

 

 

 

[BILLET BEARING SUPPORT COVER]

TEXT IF YOU WANT  TO BUY ...(ONLY)

 

Its a bearing support cover in good shape...everything needed to install i have .!

 

843-303-0271

 

$155 shipped

 

[super power reed valves/TZ bearing deal]

bearing sold...

 

reeds i still have...$30 shipped