feelsoright03

What are those in the last pic 10 paddle staggerds or what?

Bump

West Michigan Sand Dragway is going to have a Open ATV class on September 3rd. Any type of ATV is allowed to enter as long as you sit on the vehicle and not in it. The entry fee is $50 and the owners agreed to a $1000 purse for the winners with a minimum of 40 entries. BONUS Extra $400 pot for 1st and 2nd. 1-$500 + $300 (Cash Pot) = $800 2-$250 + $100 (Cash Pot) = $350 3-$125 4-$125 1-$600 + $300 (Cash Pot) = $900 2-$300 + $100 (Cash Pot) = $400 3-$100 Thank you to CT Customs, Rigger Racing, Carrying on Racing for sponsoring.

Im just going to throw out that I think this is a tyson frame. Ive seen many, many, many tyson frames and this is very similar to every bend on a tyson as far as the front end goes but has some special bends in the subframe area. ~Teddy~

PM was sent. Ill even throw in a fresh drag cut seat. ~Teddy~

Wow thats crazy. Surprised JD hasnt bought a set to make a grill yet. Thats all they need is a better looking grill in my mind. ~Teddy~

WEST MICHIGAN SAND DRAG'S A.T.V. BASH June 17-18 Its just around the corner guys who's gonna make it? Will have flyer uploaded later today ~Teddy~

Don't be afraid of this buyer guys. Very good guy to deal with and very reputable from over on planetsand. If I wasnt looking for an inframe drag pipe I would definetly hop on these pipes as they are pretty rare and some good pipes. ~Teddy~

I would go +8 with the 12 haulers like you said in your 1st post. I say this because you will be able to use the same setup later on with a little larger motor and not have to do any upgrades to your chassis. With you being where your located get hooked up with Proformance prototypes or Tyson. Shawn at profo will probly have you do around the same setup as what you thought and Tyson Im gonna say would tell you to go long out the back with a big tire. ~Teddy~

Bump for a good seller. Got my items today and they were in great shape with fast shipping. ~Teddy~

what paddle are they? Extreme, Rippper, etc?

My brother and myself will be at hideaway too.

Payment sent for rear brake line and front marvins. He told me the seat was sold already. ~Teddy~

Bump

Just wanted to update this with a flyer and get the word out. Come on out and do some racing guys. Even the stock Shee's can compete in the ATV class. If you would rather pass on the racing aspect atleast come on out and watch and support a Michigan Track and show the world what we think about Sand Drag Racing. ~Teddy~

Joe get with Ray. He sent me a couple the other day. ~Teddy~

I would love to see this happen. Means I get more competition and get to hangout with you guys more. ~Teddy~

By the way they are Rotax cylinders on it. Just in case you were curious what ones they use. Ive heard of crankers going from like 670 to 809cc or something like that. ~Teddy~

up

Thanks man thats a little closer. I appreciate it. ~Teddy~

Could I get some pics of the hood to [email protected] please. I know you probly wouldnt part the hood from the frame so I would just like some larger pics so I can see the detail and get some ideas for my hood. Thanks I appreciate it. ~Teddy~

Bump.

I'm not for sure how much the lonestar hub weighs. I know ive seen on this forum in a for sale add that the billet ones only weigh a little less. The stock hub with a brake rotor on it weighs 2.6lbs. My lightened hub the way it is weighs in at 1.1 lbs. so knocking a total of 3lbs. off the front of ur bike. Then you could go with a set of drag struts which I also make and lose almost 5lbs. a shock being at the most 16lbs. lighter in the front end. Maybe somebody can chime in on the weight of a lsr hub. As for a price on doing this I will do it for $80 shipped back to you for both hubs. Quite a difference in price compared to LSR. They will be lightened like the one above and sandblasted and shipped back. I could possibly hook up with a couple people and have them powdercoated and polished as well for extra. ~Teddy~

Thanks shane. If any of you guys are interested in having this done I wouldn't charge much compared to what the lonestar hubs cost. These are all CNC machined so I can have a quick turn around time as well and get them right back to you. Also by reducing the pocket size a little bit you can still use your brake rotors just the back side wouldnt get turned. It would weigh a little more. ~Teddy~