r8derfan4life

These A Arms are extended. I would post a picture on here but don't know how.

I recently purchased a banshee that had these older aftermarket A-Arms. They have decals on them that say " DRD&D" on them. I want to get them powedercoated, but don't know where to get new ball joints for them. They look like you need a spanner wrench to remove them because on the back side it has four notches across from eachother . I contacted a local bike shop and they told me they didn't know where or how to get these balljoints . Can anyone help? Have you ever heard of this brand?

sO IF THERE IS SOMETHING IN THE VENT TUBE IT WILL LEAK OUT?

i HAVE A 1996 AND IT RUNS PERFECT, EXCEPT AFTER RIDING IT FOR A WHILE IT STARTS TO LEAK A GREYISH/BROWN FLUID OUT OF THE TUBE LOCATED UNDERNEATH THE GAS TANK. i TRACED IT BACK AND IT SEEMS TO BE CONNECTED TO A BREATHER ON THE CASE. cAN ANYONE HELP ME OUT?

I noticed that when I open the throttle up when haullin a$$. I get some oil leaking right under the gas tank on the rightside out of a small black rubber hose. It seems to be like hot oil. What is this? And how do i Fix the problem? I traced it back and seems to be comming out of the rear of the crankcase. It only does it when haulin a$$. :shrug: