bansheesa

Thanks, will look into it. Shee sputters a bit before power band. Kind of like a carb battling to clear. Battles to start if not hot. Here in South Africa, we do not have a nice stretch to do a plug chop. So it is a bit difficult. Top end in 4th or so seems fine. But I know that shee is running lean. I will also check with the rev and airscrew test to see on low end. Also would like to know the better tires to run on the shee for cross-country and out rides (jungle like with lots of ups and downs and dirt ranging from loose to compacted) Thanks

Sorry about this question again. This is what I have: 20 overbore with Wiseco Pro Light's, VForce 3 reeds and cages, +4 timing (Pro Design), Cool Head (Pro Design) 22cc, FMF fatties with powercore 2, Pro Design foam filter (Yellow with red outfilter) and adaptor, open airbox with box outerware. I am at sea level and average of 80 F. Jetting at the mo: 280 main, 25 idle, dynojet needle at 4 down. Mixing at 32:1 (belray synthetic). I know with the mods, I am running to lean. Please put me close to if not spot on. Thanks