bry

i know i cannot get new price for this stuff so make me an offer !!

I have a new set of trinity out of frame drag pipes maybe 30minutes of run time on them..located in MO..asking 550.. for them but neg..will email pics if neded..thanks...

I have a +6 alba pro elite swingarm powdercoated black and a jj&a 40mm gun drilled axle that is adj.. from 29 to 34 inches and a jj&a 40mm bearing carrier all new never been rode on just sat in my garage they are on the bike now for pics..located in MO. asking 1500.00 for all but price is neg..will send pics to email add.. if needed. thanks.........

you still have a stock flywheel ?? have paypal//

can i get a pic of the pipes ??

The shearer out of frames are sold but i still have a set of trinity out of frames with about 30 minutes on them for sale or trade for some shearer small flange and small bore in frames with silencers..the trinity pipes are chrome and are still perfect they bolt to the foot pegs..

I have a new set of out of frame shearer chrome drag pipes and want to trade for some in frame shearers chrome with stingers..will send pics to email address if needed thanks..

do you take paypal if you do can you do 150 shipped??

hey guys i am looking for an amp link with good bearings and gears .. have paypal!! for banshee of course!!

i am i bad need of a stator for an 87 shee !!!!!!!!!!!!

wondering if you had the stator and if you do the price shipped to 65722.. thanks

i found the prob junk ricky stator in need of an 87 stator!!!!!!!!!!!!!!

It was the stator it starts up just fine with my 97 stator on it junk ricky stator!!!!!!!!!!!!!!!

I will have to check the stator i know the coil is good it runs my 97 shee just fine i will swap stators with my 97 the plugs are diff but i will run jumpers over just to see THANKS U BUNCH..

if the bike has sat for 2 or more days i will kick start in 2 or 3 kicks or you can push start it by yourself . compression is approx..120 on both cylinders . maybe 10 hours on new pistons new coil new ricky stator adj timing plate at 3 degrees . it like when it warms up it looses fire altogether wierd!!

i bought an 87 shee the other day and rode it the night i got it for a few minutes.. took a while to get started maybe 25 kicks..rode it next day lost power and fouled a plug..put new plugs in it and checked spark just to make sure and i couldnt see it at all.. let it sit for 3 days and went back and it fired up the 3rd kick .. i warmed it up and it acted funny like trying to foul plug again..shut it off and put new plugs in it and it hasent started by kicking it at all but you can pull start it fine....... ANY SUGGESTIONS... :shrug:

here are the stock jugs off my 06 that had a tank of gas run throught them stock bore no porting..view pic 1view pic 2 these are located in p-burg MO asking 250 with pistons..

brys heres the pic of the jugs they are 69.92 bore but will need another bore to be good.brys these are located in p-burg MO I would like to get 350.00 for them but i am open to good offers.. click on name to see image...

looking for a +2 +4 durablue axle with or without hubs ..leb,mo

my flywheel is stuck i have shattered two pullers trying to get it off !! any suggestions ??

Anybody interested in a set of trinity racing pro MX ported jugs they are at a 69.92 bore if you need pics let me know..

I am in need of a swingarm and bearing carrier and stock carbs!!!!