Banshee-Predator_Owner
-
Posts
38 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by Banshee-Predator_Owner
-
-
Got a 02 Banshee, what is the trick setup for adjusting a chain so it won`t kill the cases ? All my drive is stock, got all new chains and gears, just want to do it right the first time, Thanks, ya`ll have been great help ! Milo
WIth the rider(s) on the bike, reach down and "pull" up and down on the chain, there should be 7/8inch of play, thats how i always set it on all my bike, also
-
location?
-
u have upper and lower banshee a-arms with new bushing $75+shipping
-
-
-
-
You might be one of the biggest d-bags on here. Your right, there is no absolute possible way that any quadzilla could even be remotely fast. I am completely mistaken in what I said, I must have been high on crack and seeing things. My complete apologies to all of you guys who may have been offended by the possiblity of a 500cc single cylinder quad possibly beating a banshee. Will you ever forgive me?
you da' man
-
got some bigger pics? $230 shipped is kinda high for wat they look like in thos little tiny pics, i paid $120 shipped for mine and they look like that, get some bigger pics so he can see wat they really look like
-
Will the 450 spindles/knuckles work with banshee hubs?
-
im running yfz 450 arms and was wondering if theres any difference between these two spindles? mostly concerned with the angle of the top ball joint
-
ill second that .. just got my new set ... :biggrin:
anyone got the link where they found them?
-
im changing my o rings on my trinity head, wheres a good place to get them? looked on trinity's site, cant find where they sell them
-
Found some kenda dirt dog tires 22/11-10, anyone ever ran these? how they hook up?
-
i have on, bump for great tank, well worth $80 holds 5.5 gallons
-
AVGAS is high octane (burns slower and has higher flash point) oxygenated fuel(less oxygen in the air at high altitudes) wont mess with your jetting tho, has a HIGH lead content, the lead keeps your top end cooler and is good for your valves/cylinder(lead is like a lube) but if u run it strait all the time it builds on your plug, most avgas has a die in it to detect leaks (gas leaks in planes=bad) so if your carb overflow or petcock leaks it dies your stuff but helps find slow leaks, RACE GAS is cleaner burning than avgas and you can get it oxygenated and leaded also, but it cost alot more, look up VP race fuels, i myself would run race gas/93 pump gas(dont buy it from somewhere no body buys premium, youll get bad premium which is worst than good regular, buy from somewhere that alot boats fuel up at) mix to suit your compression, avgas is like 115 octane, 115+93=208 208/2=104, u could run that with 19cc domes(standard stroke), +banshees drink gas and avgas is cheaper, my .02
-
Ahhhh, the misguided youth of today.
I would personally talk to cascade innovations about a clutch and some mid-top pipes.
maybe its trail drag racing...
-
some hot rod cranks have the pinkish colored center bearings, and all ive seen use o rings to hold the bearing and not pins, u might have a vitos crank tho, not sure, need someone more experienced than me to tell, check for play or roughness in the bearings, check rod bearings play ( up and down=really bad) 2mm side to side play on small end of rod is wat the manuel says, if all is good id just advertise it as a good tight welded crank
-
he was looking for peaple to try his reeds. and yah i know what you mean im just wondering if any body tried them. im probley getting them anyways so ill let you guys know how they feel and hold up.
k, that be great, if you get them and have good results ill try out some on my brand new WIESCO crank
-
This kinda looks like a stock crank welded up or maybe a vitos crank, u sure its a hot rod?
-
have you? I'm talking about the guy who asked for Guinea pigs along time ago. His products are really cheap, it almost seams untrue.
There forged pistons look nice, but wonder how they hold up to detention and heat, they might be a pretty good piston. I've never run them myself tho
-
-
Im looking for 2 replacement sleeves, my pistons wore uncentered and ate the sleeves out egg shaped
-
looking for a good adjustable timing plate, willing to pay $30 shipped for it, post me a pic
-
anyone have extra 8 inch wheels FS?
I have some stock rear wheels, $100 shipped
BLACK or WHITE PLASTIC-cut or uncut
in Wanted
Posted
shot me some pics of what you got and prices if you can, thanks