Hey guys i need some help. I got to installing my pancake bearing i got from HJR and when i put the cover on and pull the clutch the cover pushes away from the case. When i tried to follow the Clymers and align the case arrow to the arm arrow i'd get a gap of about a 1/4"(pic 2). Then i jumped on here and found that you don't need to align the arrows just put the pressure plate on w/o springs and tighten down till the plate moves then back off a 1/4 turn and be done. Doing this i get less of a gap more like 1/8" (pic 3). i do have the clutch cable backed all the way off and the arm back against the left side of the case.