newest banshee owner

Ok guys.. I just replaced water pump impeller and all seals and bearings. I also replaced the right crank case gasket.. Now after Riding a couple of times I have a transmission oil leak.. any ideas where that is coming from?

thanks for all the help guys.. I opened the clutch cover today after I got all the parts together. I found that it already had a billet impeller installed, but I went a head and changed it to the new one I got. I also found a piece of the fiber from the clutch discs. The weird thing is, there was no missing pieces from the existing clutch discs. I think maybe that piece was what froze the kickstarter because there was some wear on the clutch hub where I found that piece. So replaced the discs any ways, and then when I was putting the screws that go in the springs one of them broke and we almost had to get a whole new clutch hub. Anyways we got it out and now we just got to wait till Tuesday until the parts place opens.

Hey guys. I just recently got a banshee. after the second time riding the banshee shut off while i was braking. I was able to start it and get back to the house. When i tried to restart the banshee there, i noticed the kickstart was stuck. After about 30 minutes the kickstart worked fine. when I checked the oil i found it was milky? I read that it could be the impeller and the water pump seal. can anyone tell me where to find these parts? also where I could get a guide on how to fix the problem since I have never worked on a shee before.. thanks mark